Yeah as @baldilocks said, just flip the drive shaft. If I recall the nuts/bolts are 14mm. After installing the DL, you will want to re-torque it after a few hundred miles.
Last edited:
Builds Honey Badger Build Thread (2 Viewers)
- Thread starter ifsmithy
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #82
attic rack! Installed - Zip tied right now - to be redone ……when i get that front row cargo net - i will be posting the speski cargo barrier in classifieds end of august - local pickup only
And right now - none of the items up there can get past the cargo barrier - no missiles to the back of this head!
And right now - none of the items up there can get past the cargo barrier - no missiles to the back of this head!
- Thread starter
- #83
decided a few weeks ago I wanted to upgrade my dash cam - currently have a front only cam and also not super happy with my current rear visabiltiy of my rearview camera when my rear is loaded up with bikes....needed a solution...
so there it is sitting in a box to be installed (soon i tell myself) and low and behind some twenty something bloke in a beater goes and gives me a little love tap from behind after a mtn bike ride - bends the pin on my quickrstuff rack - got lucky! Why did you stop dude....he asks...... becuase it was red I reply......no it wasn't he says...... see that dash camera on my rig my dude that says it was.....he shut up after that.....
happy I had one on the front but the new system is sweet - see below
bent pin....to be replaced
so after this happens - decide its time to install!
wolfbox g900 tri cam setup - front just near to my winch. Wired my rear after popping it through the firewall at the front and wiring it under the car to avoid having to rip out all the trim. One thing I do is often have a bike rack on which can block part of the view so I found some magnets and glued that to the base of the camera - now allows me to easily move the rearview cam to a few locations - works great I just need to get one of the those super strong magnets but I think its going to work. Got the deltaVS rear view camera mount so will post up when I figure how to mount that - supposed to be simple!
looks a bit fuzzy but this is a freeze frame from an iPhone video - quality is perfect.
magnet on base of camera.
can move to over locations when I remove and put bike rack on to maintain visibility
so there it is sitting in a box to be installed (soon i tell myself) and low and behind some twenty something bloke in a beater goes and gives me a little love tap from behind after a mtn bike ride - bends the pin on my quickrstuff rack - got lucky! Why did you stop dude....he asks...... becuase it was red I reply......no it wasn't he says...... see that dash camera on my rig my dude that says it was.....he shut up after that.....
happy I had one on the front but the new system is sweet - see below
bent pin....to be replaced
so after this happens - decide its time to install!
wolfbox g900 tri cam setup - front just near to my winch. Wired my rear after popping it through the firewall at the front and wiring it under the car to avoid having to rip out all the trim. One thing I do is often have a bike rack on which can block part of the view so I found some magnets and glued that to the base of the camera - now allows me to easily move the rearview cam to a few locations - works great I just need to get one of the those super strong magnets but I think its going to work. Got the deltaVS rear view camera mount so will post up when I figure how to mount that - supposed to be simple!
looks a bit fuzzy but this is a freeze frame from an iPhone video - quality is perfect.
magnet on base of camera.
can move to over locations when I remove and put bike rack on to maintain visibility
- Thread starter
- #84
The plastic window trim - been looking nasty for a while - found some cheap replacements on eBay. Look pretty decent - will have to rattle can the rear strip for some reason they are silver - 70 bucks
Old original
New eBay replacements
Old original
New eBay replacements
- Thread starter
- #85
Figured it was time to upgrade my attempt at a center console shelf for my dometic center console fridge
Not the safest thing in the world - happy to discover deltaVS build a platform and a fridge mount!
Major upgrade!
Not the safest thing in the world - happy to discover deltaVS build a platform and a fridge mount!
Major upgrade!
- Thread starter
- #86
Also got the deltas VS rear view camera mount - needed the wolfbox adapter kit as well - 20 bucks from Amazon
This is a side view with the mirror pulled forward - normally sits way closer to the windshield
This is a side view with the mirror pulled forward - normally sits way closer to the windshield
- Thread starter
- #87
rear quater panel de-dusting project - discovered a breather line....
gonna hunt for areas of dust entry but am pretty sure this is after 30 years so all in its not looking too bad back there
- Thread starter
- #88
upgraded my marine hatch tailgate storage to full setup from bulletproof fabricators!
Would you be so kind as to consider reviewing our company’s dash cam? Here are its key strengths:
1.All front, interior, and rear cameras utilize Sony sensors, with the front camera featuring the Sony IMX678 (a top - tier 4K sensor).
2.It boasts industry - first full - color night vision, delivering sharp details even in low - light environments.
