Help ID tie rod ends Saginaw

[hanzo111]

Hey everybody, I need some help.

I’m wrapping up my build right now and have no idea what was used in my conversion for the Steering. I did install a new Steering box, I need to change all of the tire rod ends and I have no idea if I purchased Toyota or something else, I’ve owned it for 15 years but the previous owner did the installation of the power steering. Thanks in advance.

 

[Pighead]

Sometimes, if you clean up those ends really clean, you can read a part number

 

[rainingagain]

From the pics you posted, it looks like a stock Toyota setup with a 555 tie rod kit except for the pitman arm. Does the pitman arm side at the pump look modified? I don't know enough about the Saginaw swapping setup but that one looks... "beefier"? No stock steering stabilizer because of said pitman arm.

 

[hanzo111]

From the pics you posted, it looks like a stock Toyota setup with a 555 tie rod kit except for the pitman arm. Does the pitman arm side at the pump look modified? I don't know enough about the Saginaw swapping setup but that one looks... "beefier"? No stock steering stabilizer because of said pitman arm.

Thanks for the reply.
Not sure what a stock setup would look like. My only fj.

The pitman arm is new, I swapped the one previously installed as I swapped from SOA to stock setup SUA.

I’ll see if I can see any numbers on the tie rod ends.

 

[charliemeyer007]

Have you tried google searching "Saginaw powering steering conversion on a fj40"?

Mar 19, 2009 — This thread will detail a Saginaw power steering install into my 79 FJ40. I have been running a "minitruck" power steering box with a Tercel ...
FJ40 Power Steering Conversion - IH8MUD Forum
20 posts
Jun 17, 2012
Saginaw Steering conversion : Does that looks right?
8 posts
Jun 5, 2021
Which SAGINAW POWER STEERING BOX to use???
15 posts
Mar 3, 2009
FJ40 Power steering | IH8MUD Forum
20 posts
Feb 12, 2018
More results from forum.ih8mud.com

 

[hanzo111]

Have you tried google searching "Saginaw powering steering conversion on a fj40"?

Mar 19, 2009 — This thread will detail a Saginaw power steering install into my 79 FJ40. I have been running a "minitruck" power steering box with a Tercel ...
FJ40 Power Steering Conversion - IH8MUD Forum
20 posts
Jun 17, 2012
Saginaw Steering conversion : Does that looks right?
8 posts
Jun 5, 2021
Which SAGINAW POWER STEERING BOX to use???
15 posts
Mar 3, 2009
FJ40 Power steering | IH8MUD Forum
20 posts
Feb 12, 2018
More results from forum.ih8mud.com

Thank you. I did of course, I found that there were a few ways to set up the system after conversion.

My trans adapter was built by Downey. I searched for a week and and found nothing until I posted a picture.

Same issue here. I figured I would post a picture in case someone recognized the 18 year old setup.
I have owned it for about 15 years and never drove it until I started the restoration 12 months ago.

Hopefully I can figure this out quickly as I only have tires and exhaust left to sort out.

Thanks for the help and advice.