Ga. Cruisers Chat Thread (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@TeddyBoy hold John back. Look what I found!

NatLite.jpg
 
I tried one. They’re gross.
 
Anyone in the Roswell area by Canton Street with a 40 series and a 2f? Looking to see how the choke cable and heater hoses are ran. Just need to take a look or snap some pictures.
 
Hey y’all. (Mods please delete if wrong thread.) I’ve just moved my family to waaay north GA and will buy a house bordering the Chattahoochee NF next week. Is there a good TLC/T4R etc shop in roughly Towns or Union Co?

I have a 2006 GX470 kdss that will get new 31” ATs on 5th gen T4R OR wheels in a couple weeks. I hope that and an the alignment will take care of the slop, but I chewed up the outer CV boots when doing shocks and I expect there will be other needs to attend to. I have plans to clean the last season of Illinois salt damage off the underside, and make this a third vehicle I keep for as long as possible. I’m starting a new job and don’t have time to do everything esp when trashing new parts, dealing with the KDSS front sway bar etc mean that a good specialist shop could do it twice as good in one-tenth the time. I don’t want to go to just anybody. Thanks.
 
Welcome to Georgia! There are some good trails up in your neighborhood!!

I'm in Atlanta and there are a couple good places I could suggest down this way if you decide to do it down here.

Matthew
 
I’m bet there are some great places down your way, I just hope I can find something decent up here. 4 hours round trip.
 
Welcome to Georgia! There are some good trails up in your neighborhood!!

I'm in Atlanta and there are a couple good places I could suggest down this way if you decide to do it down here.

Matthew
I am based out of the marietta area, anything anywhere around here that you would recommend for front end work?
 
I am based out of the marietta area, anything anywhere around here that you would recommend for front end work?

ACC or if it’s just a front axle rebuild save yourself a ton of money and do it yourself. It’s not a hard thing to do, just messy.
 
All right, an official event thread has been created. Please post up here if you plan to attend:


Smitty
 
Hey guys. I'm part of the VA chapter, but heading down for labor day week, and was hoping to get some info on places to go wheel.
Looking for easy/moderate trails. Convinced my cousin with a new 200 to take it out, I've got a 200, and going to have an older Montero going out with us riding 33s

I see that Nimblewill should be easy. Looking for something to just make a day trip out of. Staying in Gwinnett County, also don't want to just do a dirt road. Appreciate any guidance
 
Last edited:
I'm in a similar boat, @afgman786. I'll be in my 60-series with a buddy in a JK, both of us are open/open on 33s.

What say you, GA fellas?
 
Don't laugh to loud I'm looking real hard at them myself!
Screenshot_20190731-061424_Facebook.jpg
Doors off Top off, Toyota forgot that part!!!
 

Users who are viewing this thread

Back
Top Bottom