- Thread starter
- #41
Rear axle is a different design. There may be other differences, but I don't know what they are.
Front Axle Cheatsheet (2 Viewers)
- Thread starter DARKNESS
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
Could someone please show a hot babe doing a front/rear axle job? I'd like to see all greasy while holding a drippy birfield
I think the axle porn is over in the HardCore Corner... or so I've heard...
alia176
SILVER Star
Your rear axle is semi-float I believe but the procedures and torque values should be similar. The lug nut torque does change from the 93/94 to post 94 and that is very critical. We're talking 100+ ft-lb to 76 ft-lb. I'm not sure if the 91/92 lug nut torque values are the same as 93/94 though.
This will definitely help for our burf rebuild this weekend. Thanks for the cheat sheet.
I found this cheat sheet very handy during my knuckle rebuild last weekend, even though I had all the torque specs in my step-by-step directions (see attached). Thanks for the hard work!
Nice work
If not already make it part of FAQ
If not already make it part of FAQ
Great cheat sheet. I have had this printed out in the shop since you made it. Used it last weekend. So much faster. I'm getting close to having all the tourqes mesmerized (spelling) Thanks!!!
NLXTACY
Wits' End
OK, I had two meetings cancelled on me so I got stuck with nothing to do. So I recreated your hard work and started making it in 100% vector so that I can scale to any size. I might actually make some posters of it. Dunno. I just wanted something a little different in my work area.
Still need to fill in a bunch of part numbers. The Steering Knuckle cone washers were missing in the FSM so I added those and add the brake pads.
Edit: Titled it and made a few edits. Need to track down the missing numbers.
Last edited:
- Thread starter
- #49
That is sweet!
NLXTACY
Wits' End
Redgrrr
I have a problem with 40s
I'd buy said shirt...
Superb
- Thread starter
- #54
Hmm, maybe I know what my next t-shirt design will be
Ha, nice. Put the rear axle on the back.
Wayne
Bought by His blood, kept by His power
Thanks for creating these cheat sheets.
Uber nice. If I right click/save as, will I get high quality art that I can make into a poster? Or is that something you want someone even doing with your work?
Thanks none the less.
Thanks none the less.
NLXTACY
Wits' End
OK I found a bunch of missing numbers and added those as well. I also included a few more components that weren't on the original FSM page.
I am currently looking into making posters that are 18" x 27" laminated. Probably only 100.
It would be cool if @beno took a look to check my handy work to make sure I don't have any glaring errors in here
I am currently looking into making posters that are 18" x 27" laminated. Probably only 100.
It would be cool if @beno took a look to check my handy work to make sure I don't have any glaring errors in here
NLXTACY
Wits' End
I'm also looking at doing a run of t-shirts as well, because why not
OK I found a bunch of missing numbers and added those as well. I also included a few more components that weren't on the original FSM page.
I am currently looking into making posters that are 18" x 27" laminated. Probably only 100.
It would be cool if @beno took a look to check my handy work to make sure I don't have any glaring errors in here
View attachment 1339352
How about a neoprene mat printed with this? Kinda like this, but much larger - for garage use? That would be awesome!
