flat pitman for a 62 box?

[xjnation]

Any available swaps to put a flatter pitman on a 62 power steering box? SOA on a 40 and need less drop on the pitman, atleast I think......so far.

 

[Cruiserdrew]

The 80 Series Pittman fits on the splines and is a little flatter overall. The drag link end though, has a different taper.

 

[cruiserbrett]

since the drag link pitman arm end on the 60's has a larger taper section than the 80 ends, you can look at:

SKY-Manufacturing

they have ones taper for 80 series ends, and you could get one and find a machine shop to open up the taper to fit the ball stud from the drag link end on the 60 pitman arm. Or just figure out a way to run the 80 series end.

 

[xjnation]

Thanks, guys. I'll check into that. Cruiserdrew, cruiserbrett..... You guys brothers?? ;p Thanks. Tim

 

[Cruiserdrew]

Thanks, guys. I'll check into that. Cruiserdrew, cruiserbrett..... You guys brothers?? ;p Thanks. Tim

Like they say, brothers from a different mother....

 

[pappy]

since the drag link pitman arm end on the 60's has a larger taper section than the 80 ends, you can look at:

SKY-Manufacturing.

Right, Sky Manufacturing. Pretty sure that's where I bought mine. FJ60 box with FZJ80 rod ends.