Parting Out Fj60 part out- SLC ut (1 Viewer)

[NicksFJ40]

Do you still have:

Battery hold down bracket
Front fender marker lights
Windshield wiper arms and motor
Rear quarter panel "Land Cruiser" emblems
Power steering pump


Thank you
Nick

 

[Whoops]

Do you have the spare tire hanger? Specifically the bracket that secures the tire to the chain and pulley?

 

[ab1]

Do y

Hey y’all, I’ve got a 1985 fj60 for part out.
So far, the items I’ve sold are : fuel injection system, dash cap, stock carb, rear seatbelts , back seat, headlight bezels (the new ones) window crank handles
Pull handle inside rear window.
Everything in the photos is still for sale, but if you want the rear tires (which are new) please bring alternative ones so I can still roll it out. I’ll do a good deal on them as a whole.

It’s got 3 spares with tires in unknown condition, most likely bad tires (though they may retain air)

The engine is supposedly rebuilt, but I paid $2000 for the rebuild and people are telling me that’s too cheap for a full rebuild. It was rebuilt by GT mobile mechanic in Utah (Gregorio Gomez) and he gave me receipts. Specifically, the internals were slightly rusted and he supposedly rebuilt the internals and had the block honed. I don’t believe the valves were rebuilt.

I’d prefer to sell the engine and trans as a whole, without a carb. Feel free to do a compression test.


The winch is still for sale, but I can’t ship it, and I’d prefer if you pulled it off as it’s welded on the front on the bolts. (you can use my grinder, but bring protective gear please.)
The interior is dirty but I don’t think it’s ripped anywhere but the drivers seat.
This was a farm truck and is very rusty, I don’t think the frame is much use. I’d sell it after parting out along with the body in early March.

If you have any questions you can text me at (360-768-1276).
I apologize to everyone in the other thread, and I’d prefer not to bring that thread onto this one.

View attachment 1887064

View attachment 1887065

View attachment 1887066

View attachment 1887067

Do you have rear interior cargo panels in brown?

 

[Hamachi]

What’s left?
I can pick up ...

 

[LCS]

Sent you a PM if you're still around.

 

[Hamachi]

Is transfer case still for sale?

 

[Hamachi]

How much for TC and front axle?

 

[o2sensorheating]

tried to text, also in slc looking for some trim pieces. can you text me? - joe 2038931981

 

[jkdur728]

Do you still have:

Battery hold down bracket
Front fender marker lights
Windshield wiper arms and motor
Rear quarter panel "Land Cruiser" emblems
Power steering pump


Thank you
Nick

I have a Wiper motor and battery hold down & the emblems. I have a power steering pump but its not in the best shape. send me a message if you need any of it still.

 

[81Red60]

Do you have the stock radio?

 

[jkdur728]

Do you have the stock radio?

No I dont. Sorry hard to come by.....

 

[jrm68fj40]

How much for the tail gate?

Hey y’all, I’ve got a 1985 fj60 for part out.
So far, the items I’ve sold are : fuel injection system, dash cap, stock carb, rear seatbelts , back seat, headlight bezels (the new ones) window crank handles
Pull handle inside rear window.
Everything in the photos is still for sale, but if you want the rear tires (which are new) please bring alternative ones so I can still roll it out. I’ll do a good deal on them as a whole.

It’s got 3 spares with tires in unknown condition, most likely bad tires (though they may retain air)

The engine is supposedly rebuilt, but I paid $2000 for the rebuild and people are telling me that’s too cheap for a full rebuild. It was rebuilt by GT mobile mechanic in Utah (Gregorio Gomez) and he gave me receipts. Specifically, the internals were slightly rusted and he supposedly rebuilt the internals and had the block honed. I don’t believe the valves were rebuilt.

I’d prefer to sell the engine and trans as a whole, without a carb. Feel free to do a compression test.


The winch is still for sale, but I can’t ship it, and I’d prefer if you pulled it off as it’s welded on the front on the bolts. (you can use my grinder, but bring protective gear please.)
The interior is dirty but I don’t think it’s ripped anywhere but the drivers seat.
This was a farm truck and is very rusty, I don’t think the frame is much use. I’d sell it after parting out along with the body in early March.

If you have any questions you can text me at (360-768-1276).
I apologize to everyone in the other thread, and I’d prefer not to bring that thread onto this one.

View attachment 1887064

View attachment 1887065

View attachment 1887066

View attachment 1887067

front diffs with discs brakes I am interested

 

[Rob Faucett]

Is the A/C bezel still around. I'd take the bezel and everything attached to it.

 

[jkdur728]

Is the A/C bezel still around. I'd take the bezel and everything attached to it.

I have a bezel I think it has one crack. Fixable. And when you’re talking about attachments are you talking about Switches? And ash try?

 

[skhochay]

I need 2 front door panels blue and not ripped - TY

 

[Rob Faucett]

@jkdur728 - Yes please. Every switch (including A/C & heat), button, ash tray, little wallet storage box thingy, blanks and screws/fastners attached thereto. Also would take the choke cable and knob if available. Shipping is 98105.

 

[skhochay]

front Door panels (blue)

 

[Yukon Kit]

Hey y’all, I’ve got a 1985 fj60 for part out.
So far, the items I’ve sold are : fuel injection system, dash cap, stock carb, rear seatbelts , back seat, headlight bezels (the new ones) window crank handles
Pull handle inside rear window.
Everything in the photos is still for sale, but if you want the rear tires (which are new) please bring alternative ones so I can still roll it out. I’ll do a good deal on them as a whole.

It’s got 3 spares with tires in unknown condition, most likely bad tires (though they may retain air)

The engine is supposedly rebuilt, but I paid $2000 for the rebuild and people are telling me that’s too cheap for a full rebuild. It was rebuilt by GT mobile mechanic in Utah (Gregorio Gomez) and he gave me receipts. Specifically, the internals were slightly rusted and he supposedly rebuilt the internals and had the block honed. I don’t believe the valves were rebuilt.

I’d prefer to sell the engine and trans as a whole, without a carb. Feel free to do a compression test.


The winch is still for sale, but I can’t ship it, and I’d prefer if you pulled it off as it’s welded on the front on the bolts. (you can use my grinder, but bring protective gear please.)
The interior is dirty but I don’t think it’s ripped anywhere but the drivers seat.
This was a farm truck and is very rusty, I don’t think the frame is much use. I’d sell it after parting out along with the body in early March.

If you have any questions you can text me at (360-768-1276).
I apologize to everyone in the other thread, and I’d prefer not to bring that thread onto this one.

View attachment 1887064

View attachment 1887065

View attachment 1887066

View attachment 1887067

Need rear bumper without ends? Is it clean rust free

 

[Samppahj]

Pm sent

 

[Molinuscr]

Hi,

I'm

looking for all the parts from the pedal to the carburetor, please see attached diagram.

Thanks

Ed Molina