FJ40 Parking Brake Cable and Handle (2 Viewers)

[justin1160]

Hi-

I would like to have my mechanic connect the parking brake on my 1969 40. The truck had the 2F motor installed when it was re-done. There appears to be a parking brake cable, but it is not hooked up and I do not have the handle. The attached image looks like the cable that is under my hood. Any idea if this will work if I find a handle? And if so, what handle should I look for? I am assuming a later FJ with the 2f motor. Thanks!

 

[brian]

depends what transfer case you have.

 

[justin1160]

depends what transfer case you have.

Should I be able to tell by looking at it? Would you be able to tell from a photo?

 

[brian]

yeah its either going to have a parking brake drum, or not.

 

[justin1160]

yeah its either going to have a parking brake drum, or not.

The brakes are all drum brakes right now and this cable is hooked to the transfer case I believe.

 

[3_puppies]

The brakes are all drum brakes right now and this cable is hooked to the transfer case I believe.

the drum on the rear of the transfer case is the park brake.
question is, if it has all the guts inside, shoes, levers, etc
for a brake handle, post in the classifieds, there are several pieces to it.
A pic under the dash above the gas pedal, where your right knee would be, will show what you have or not have.

 

[justin1160]

the drum on the rear of the transfer case is the park brake.
question is, if it has all the guts inside, shoes, levers, etc
for a brake handle, post in the classifieds, there are several pieces to it.
A pic under the dash above the gas pedal, where your right knee would be, will show what you have or not have.

Tks. I’m assuming it has all the guts as if is connected to the rear drum. The cable runs under the hood but stops there. It was never connected inside the truck or to a handle.

 

[4Cruisers]

This should help:

 

[justin1160]

This should help:

View attachment 2261794

This should help:

View attachment 2261794

Thank you.

 

[ToyotaMatt]

This should help:

View attachment 2261794

Thank you.

the drum on the rear of the transfer case is the park brake.
question is, if it has all the guts inside, shoes, levers, etc
for a brake handle, post in the classifieds, there are several pieces to it.
A pic under the dash above the gas pedal, where your right knee would be, will show what you have or not have.

My NOS cable assy 46410-60021

fits :

Part 46410-60021 (CABLE ASSY, PARKING BRAKE, NO.1)

it is also Available right now , if anyone needs it ..........

PM me please .............

	Date range	Model	Frames/Options	Found in diagram
	03/1969-06/1980	TOYOTA LAND CRUISER	BJ40,FJ4*,55	46-01: PARKING BRAKE & CABLE
	Model Dates:	Matching Models:	Model Options:	Links to diagrams:
	03/1969-12/1974	FJ40L-A	USA, TP, F	46-01 46-01
	01/1975-01/1976	FJ40L-KJA	USA, TP, 2F, 4F, RB	46-01
	03/1969-12/1974	FJ40LV-A	USA, VAN, F, VLS	46-01 46-01
	04/1972-12/1974	FJ40LV-AC	USA, VAN, F, VKC	46-01
	01/1975-01/1976	FJ40LV-KCJA	USA, VAN, 2F, 4F, VKC, RB	46-01

 

[ToyotaMatt]

@3_puppies

my 1965 paper parts cataloger has a 46410-60020

i checked both #'s

60020 and 60021

both cover exact same application dates range but DO NOT supercede it seams

do u know why this is ?

maybe @Living in the Past

or
@4Cruisers

can help solve this mystery too ?

thanks paul

 

[3_puppies]

@ToyotaMatt
there are 2 different styles in the pics in this thread,
the OP posted a pic with a "T" on the end to go to the pull handle assembly
pic you posted has an eye and needs a pin to attach to the pull handle assembly

 

[ToyotaMatt]

@ToyotaMatt
there are 2 different styles in the pics in this thread,
the OP posted a pic with a "T" on the end to go to the pull handle assembly
pic you posted has an eye and needs a pin to attach to the pull handle assembly

ohhhhhhhh

ok

i see

strange ...................?

my 1965 parts cataloger shows my 60021 shape end with that metal clam shell shield too even ?

but has a 60020 part #


who knows ...........