^ the above problem can be solved with more lift! 
Builds Evolution of a Land Cruiser: My 80's build thread (5 Viewers)
- Thread starter jcardona1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
2fpower
SILVER Star
Hello, my name is BOB!
I believe its the same lift as the OP^ the above problem can be solved with more lift!
nukegoat
Should have bought a Jeep
I suppose you could offset the swing-arms and move the spindles in further
- Thread starter
- #1,285
I've been so tempted to do this. That's why I went for a simple 4x4Labs bumper instead of trying to chop the rear quarters and do a custom bumper. If I'm gonna cut, I'm gonna make it count. But that won't be till I decide I'm ready for Fordyce
I believe its the same lift as the OP
I'm on the FOR springs plus 1" spacers. But I just bought some 5" OME Comps and 2.5" Radflos for the rear to get that ass up in the air a little more
Last edited:
This corner is were all the damage is to my 4x4 labs bumper but without it no swing outs
If you can figure out a way to keep your swing outs and reduce the corner would be ideal
View attachment 1002831
Phil,
I can see how that corner is weaker minus the spindle... With dual spindles in my labs bumper that corner is solid stock spindle on both sides. It's welded both into the top plate and the lower angle / bevel plate making that corner solid steel...
I had a WrX meet it's maker in a parking lot when they backed into my pass side corner of the bumper... Rear fender, light, trunk lid = 6K damage to the WRX...
As for me... A can of spray paint.
-Matt
2fpower
SILVER Star
I have never seen you do anything half-tailed, so when you do it, we will be watching!
Carry On.
I believe its the same lift as the OP
LOL you know I love giving you chit!
Jose am I understanding you may have some FOR's and spaces for sale in the near future?
- Thread starter
- #1,289
- Thread starter
- #1,290
Sh1t just got real yo! Look at the size of those lower links 
Brian @4WheelUnderground is an artist! Coilovers are still en route.
Brian @4WheelUnderground is an artist! Coilovers are still en route.
jtwopark
live, eat, sleep Land Cruiser!!!
WHAT in the HOLY MOSES is that? stop spending money! or else i'm telling on your significant other....hehehe...grinch~~
jokes set aside, coming along nicely!
jokes set aside, coming along nicely!
- Thread starter
- #1,292
NLXTACY
Wits' End
Jose, there is a lot you do that I admire. Well, now I'm just jealous. 
Sh1t just got real yo! Look at the size of those lower links
Where's the "not like button"...
Nice!! What are you using for coil towers?
- Thread starter
- #1,297
Thank you sir. Just trying to keep up with that big boysJose, there is a lot you do that I admire. Well, now I'm just jealous.
I think it's both of you guys' turn now!
Not quite sure yet. I like the Ballistic Fab towers because they don't interfere with the steering shaft, but Ruff Stuff towers are built like tanks. Downside is they require notching like @Booger weldz did, but in the grand scheme of what I'm doing at this point, that's nothing really.
Do the ballistic fab towers offest/angle like the one's 4WU uses?
- Thread starter
- #1,299
Brian hasn't made towers for the 80 yet but yes, they would all sit angled back. The gold 80 we've seen pics of uses Ballistic towers
- Thread starter
- #1,300
I'm gonna use this post as an future reference for me. Just an easy place to come back and find these pics. May come in handy for others to know how this all goes together. Credit goes to @sorensenjg and @bobbynelson0730 who now owns this bad ass 80!
