Electric locker install questions...

[77cruizer]

I'm probably gonna do the 80 series locker conversion and I was wondering a couple of things. Where can I find PN: 43412-60060, the front Long side inner axle from a 70 series, pre 1991, non-us? And since I have to change the ratio to 4.11 like my rear do I have to buy a new ring and pinon made just for the 80 series, or can I just find an old set of stock gears from a 40 that are 4.11? (are the ring and pinon sets from a 40 and an 80 interchangeable?)

 

[77cruizer]

b
u
m
p

 

[pappy]

I'm probably gonna do the 80 series locker conversion and I was wondering a couple of things. Where can I find PN: 43412-60060, the front Long side inner axle from a 70 series, pre 1991, non-us? And since I have to change the ratio to 4.11 like my rear do I have to buy a new ring and pinon made just for the 80 series, or can I just find an old set of stock gears from a 40 that are 4.11? (are the ring and pinon sets from a 40 and an 80 interchangeable?)

The long side axle shaft is not available from Toyota in the USA. Dan tried and tried for me. I ended up getting it from CV Unlimited. http://www.cvunlimited.com/

As far as the rear, I installed 4.11 in the rear and the 4.10 electric in the front. My truck hasn't moved so I don't know if it's an issue. You can get a 4.10 diff from an unlocked 80-series.

 

[77cruizer]

Thanks pappy. How much was the axle shaft from cv unlimited? I couldn't find it on their website.

 

[pappy]

Thanks pappy. How much was the axle shaft from cv unlimited? I couldn't find it on their website.

You're right, it's not on the website. You need to ask. $209.50 delivered to my door.