Got these art pieces secured... I'm beat, arms are heavy Will post feedback later.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Took you long enough.Got these art pieces secured... I'm beat, arms are heavy Will post feedback later.
View attachment 3333895
View attachment 3333896
I have not. Didn't have any issues when I went "mudding" at overland expo either.@chriscosta416 and @prwillard2 it looks like you've also kept the factory splash guards on at least for the moment. Have you done anything to secure the couple of now empty bolt holes in the plastic?
I kept mine and chopped them up to fit my slee skids, now with this set I’m looking for a pair of originals..@chriscosta416 and @prwillard2 it looks like you've also kept the factory splash guards on at least for the moment. Have you done anything to secure the couple of now empty bolt holes in the plastic?
Exact same reason I kept mine on @wingnutted I have yet to rip them off from any obstacle.I kept mine and chopped them up to fit my slee skids, now with this set I’m looking for a pair of originals..
No reason not to have them. They seal the area around the back of the fog light from mud.
Only issue I can imagine is backing up with your front end buried in thick mud/dirt.
Thanks everyone I appreciate the feed back.
For the next batch I probably will adjust the front skid to allow more protection of the power steering cooler and the lower radiator. For those that already have the skids and are interested in this, you will get a very good deal.
View attachment 3331535
This will also allow easier transition for filler plates to other bumpers. It will defiantly integrate nicely into my low profile bumper when I'm done.
View attachment 3331537
@Heckraiser I am running @turbo8 first version of the rear bar he made. I was able to get it mounted but unfortunately to mount the last bolt that goes through the frame you will have to remove or relocate the AHC pump.Do I understand correctly that this post means you are developing a front bumper/bumper chop skid thingy similar to your rear?
Anybody successfully mated the rear bumper up to an AHC truck yet?
13 has that on one side. Not sure why not both. But even then it is better for the bumper plastic to support it along the bottom, and from a corrosion/wiring standpoint to exclude as much water/dirt/grit as possible.The factory fogs on the 16+ LC have a pretty substantial plastic housing that surrounds on every side but the top. I wouldn't be too worried about them in that regard, at least not on the 16+ LC.
Keep up the great work and thank you for the awesome customer service!Some members have been asking when they can get in on the next batch, so I opened up the pre-order page again.
Make the $100 deposit and you're on the list. The $100 will go towards the purchase price and is also fully refundable.
I'm hopeing to get a minimum of 15 pre-orders to start production.
I want to sell this as a full set, so from the power steering cooler all the way back to the transfercase area including cat deterrents.
Updated price based on 15 pre-orders (hopefully 20) is $2250.
For those that already have the skids you will get the updated front skid and power steering guard for free, just pay shipping.
Thanks everyone, really enjoy the positive feedback and happy customers!
I thought i was tripping, i could swear i saw around $1800 this morning and now when i went to website to order the skid it was out of stock and the price seemed off. Now it makes sense the price changed. I have to think again now before pulling trigger but i really like this concept of skid frame it really is great design.Some members have been asking when they can get in on the next batch, so I opened up the pre-order page again.
Make the $100 deposit and you're on the list. The $100 will go towards the purchase price and is also fully refundable.
I'm hopeing to get a minimum of 15 pre-orders to start production.
I want to sell this as a full set, so from the power steering cooler all the way back to the transfercase area including cat deterrents.
Updated price based on 15 pre-orders (hopefully 20) is $2250.
For those that already have the skids you will get the updated front skid and power steering guard for free, just pay shipping.
Thanks everyone, really enjoy the positive feedback and happy customers!
Hope it makes sense, it was split up before and more expensive, now a little cheaper when combined.I thought i was tripping, i could swear i saw around $1800 this morning and now when i went to website to order the skid it was out of stock and the price seemed off. Now it makes sense the price changed. I have to think again now before pulling trigger but i really like this concept of skid frame it really is great design.