destins 1964 fj40 FST restore thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

oy so here is the low down.....

changing my plugs, gapping em, all is good, start up sounds way better :D

Dropped a spanner under the truck and went to pick it up.
FUEL FILTER
the filter before the pump full of ******* sand blasting sand.
fawking unbelievable!!!!


So i need to what pull the tank and flush it?
How does one go about that.

PISSED!

other than that i am happy with my doors :D
anyone have a source for the wing window rubbers?

I had the same Issue with the sand blaster sand, Sand never got pass the OEM filter though.
I finely got tired of cleaning the fuel bowl, pulled the fuel tank out flushed It out with a garden hose ran a air hose through It for about an hour put It back in the same afternoon really thoroughly flushed the fuel lines clean the filter, about a 4 hour Job. I now check the Glass bowl Regularly,about a year later never had a problem since... good luck
 
Runs like a champ now!

Great to hear you are motoring about and having fun. I too am enjoying my "runs like a champ" fj. It really is nice. With our warm (38-40) sunny weather today I spent an hour or two just driving through the woods at a comfortable 20mph and taking in the pines, snow, and puddles. I have to say I far prefer the 4 speed to the 3 on the tree however. I would appreciated doors, a heater and maybe even a top on days like this.

Too bad you are not closer, you could of pulled me out of a snow bank I got stuck in today. I got pulled out in 10 minutes by a neighbor, I felt kinda silly but so what.
 
went for a ride to the beach, photos from today.

4412668314_46cc39e42a_o.jpg

4412668818_663f9e90b5_o.jpg

4411900765_79e9d45a53_o.jpg

4412668206_84e4d721b1_o.jpg

4412668092_ae0d448f3c_o.jpg

4411900171_c3f731dec1_o.jpg

4411900087_c863831f5b_o.jpg

4411899927_a603cd4ff0_o.jpg

4412667724_92de1e5263_o.jpg

4412667536_ebfee81a1b_o.jpg

4412667290_45ed8bb56d_o.jpg

4412666704_5854c91158_o.jpg

4412665790_fe2a8e06db_o.jpg

4411901847_2fc0d829c1_o.jpg

4411901639_dbcd8ae220_o.jpg
 
Destin,

You were the guy who got beat at $700, huh?

;)

Yeah It was gonna be an early bithday present to myself, but fawking 710 for an INCOMPLETE tool kit, naw

bull****

:D

But if anyone has a complete one I would be interested.
I know a couple of cats on the board have a few but are to lazy to dig them outta their pile of extra cruiser parts :D
 
For $710 it had better be complete an in the original wrapper. And it better have $400-$500 bucks in it too.
 
Destin,

There are some great pictures these that I would put on the wall if they were black and white!

NICE man!

Also I am not happy the way that foam shifted as that wrinkle is really bugging the crap out of me.
 

Users who are viewing this thread

Back
Top Bottom