- Thread starter
- #381
Contacting Beno/Onur at Land Cruiser Parts and Consulting:
- Thread starter OGBeno
- Start date
-
- Tags
- beno parts expert parts source
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
- Thread starter
- #382
Here is @orangefj45 representing Valley Hybrids and Can-AmCruisers:
And here are some of the Terrain Tamer distributors and wholesale clients in the US market:
And here are some of the Terrain Tamer distributors and wholesale clients in the US market:
Congratulations
orangefj45
Supporting Vendor
Maybe we should have a contest ...... Who can name everybody in that pic?
Georg @ Valley Hybrids & Can-Am Cruisers
Georg @ Valley Hybrids & Can-Am Cruisers
DanS HJ-45
SILVER Star
Funny. My first thought on seeing the pic was that I didn't know who everyone was. I need to get out more.
Dan
- Thread starter
- #387
Funny. My first thought on seeing the pic was that I didn't know who everyone was. I need to get out more.
Dan
From left to right:
@joekatana from Texas // Dominic aka: "Domininja" from Valley Hybrids // @orangefj45 from Valley Hybrids and Can-Am Cruisers // @Texican from Baker Tire and Alignment in Bonham, TX // @wct49 from 49Tire in Richland, MS// @beno // @offr0adlim0 from Dealer Alternative in Jackson, MS
Last edited:
- Thread starter
- #388
Product Update:
Now carrying OEM Denso 2H and 12H-T engine oil filters.
These are the "large" filters, made in Japan by Denso.
These are no longer available in the US market as TMS, USA deemed them "non-import" status.
I have ten in stock with more on the way.
I am also carrying OEM front brake pad sets for 4x/5x/6x/7x vehicles. These were available in the US market as 04465-YZZC0 that were made here in the US by ADVICS. TMS, USA discontinued that line and they are no longer available in the US market.
I was able to procure the Japanese iterations of these pads which are made in Japan by Sumitumo. They are not cheap but they are OEM.
Finally, I was able to get a couple of Denso fuel filters for later Land Cruiser diesel applications (mainly after 1/1998 manufacture depending on market): HDJ105/HDJ100/HDJ101/KZJ90/KDJ90/ and certain 1HZ engines depending on market. These are also not available in the US as TMS, USA has deemed them "non-import" status:
Now carrying OEM Denso 2H and 12H-T engine oil filters.
These are the "large" filters, made in Japan by Denso.
These are no longer available in the US market as TMS, USA deemed them "non-import" status.
I have ten in stock with more on the way.
I am also carrying OEM front brake pad sets for 4x/5x/6x/7x vehicles. These were available in the US market as 04465-YZZC0 that were made here in the US by ADVICS. TMS, USA discontinued that line and they are no longer available in the US market.
I was able to procure the Japanese iterations of these pads which are made in Japan by Sumitumo. They are not cheap but they are OEM.
Finally, I was able to get a couple of Denso fuel filters for later Land Cruiser diesel applications (mainly after 1/1998 manufacture depending on market): HDJ105/HDJ100/HDJ101/KZJ90/KDJ90/ and certain 1HZ engines depending on market. These are also not available in the US as TMS, USA has deemed them "non-import" status:
Those filters will make my life easier on so many levels.Product Update:
Now carrying OEM Denso 2H and 12H-T engine oil filters.
These are the "large" filters, made in Japan by Denso.
These are no longer available in the US market as TMS, USA deemed them "non-import" status.
I have ten in stock with more on the way.
View attachment 1146465
I am also carrying OEM front brake pad sets for 4x/5x/6x/7x vehicles. These were available in the US market as 04465-YZZC0 that were made here in the US by ADVICS. TMS, USA discontinued that line and they are no longer available in the US market.
I was able to procure the Japanese iterations of these pads which are made in Japan by Sumitumo. They are not cheap but they are OEM.
View attachment 1146466
Finally, I was able to get a couple of Denso fuel filters for later Land Cruiser diesel applications (mainly after 1/1998 manufacture depending on market): HDJ105/HDJ100/HDJ101/KZJ90/KDJ90/ and certain 1HZ engines depending on market. These are also not available in the US as TMS, USA has deemed them "non-import" status:
View attachment 1146468
- Thread starter
- #390
Folks:
Down to about 30 emails that I still have to respond to in a substantive manner.
Each email does take time as I have to look up parts, get pricing and availability and then ask other questions about what you are working on, what you are doing, recommendations for other things to do, etc.
I appreciate your patience!
-onur
Down to about 30 emails that I still have to respond to in a substantive manner.
Each email does take time as I have to look up parts, get pricing and availability and then ask other questions about what you are working on, what you are doing, recommendations for other things to do, etc.
I appreciate your patience!
-onur
orangefj45
Supporting Vendor
Here's another pic. Chepetto himself managed to sneak in on this one.
Georg @ Valley Hybrids & Can-Am-Cruisers
Georg @ Valley Hybrids & Can-Am-Cruisers
Might as well share this pilfered photo of you two hooligans.
I hope mine is one of them!
- Thread starter
- #394
- Thread starter
- #395
My office manager spent the entire day reconciling invoices and doing general office duties (making good Turkish food for her boss, doing the dishes, and making sure the boss has clean Land Cruiser t-shirts to wear).
I'm lucky to have such a supportive and caring mom. She spent the whole day with me and she was amazed at how I controlled the "chaos" of my daily routine.
Thanks mom, this Bud's for you!
I'm lucky to have such a supportive and caring mom. She spent the whole day with me and she was amazed at how I controlled the "chaos" of my daily routine.
Thanks mom, this Bud's for you!
Cruiserdrew
On the way there
That's awesome. Glad it takes a full day for mom to reconcile the invoices!
Just a shout out to Beno and Land Cruiser Parts and Consulting-I ordered a bunch of used parts from Beno, asked him what parts I should get-about 2 boxes worth. He mud shipped to me about 4 boxes worth and a crate of axle shafts via bkcruiser from Southern Cruiser Crawl. Now I just need to see what's in the boxes, but I sense a big work day coming up. I even got a bonus driveshaft, that I plan to pass along to @TrickyT.
Wish you were closer to the West Coast, but then you'd miss out on the Turkish food, and have to wear dirty shirts.
Just a shout out to Beno and Land Cruiser Parts and Consulting-I ordered a bunch of used parts from Beno, asked him what parts I should get-about 2 boxes worth. He mud shipped to me about 4 boxes worth and a crate of axle shafts via bkcruiser from Southern Cruiser Crawl. Now I just need to see what's in the boxes, but I sense a big work day coming up. I even got a bonus driveshaft, that I plan to pass along to @TrickyT.
Wish you were closer to the West Coast, but then you'd miss out on the Turkish food, and have to wear dirty shirts.
Yep, gt your email and replied. Thanks for the good cust service!
- Thread starter
- #398
Folks:
I am out of the office tomorrow and Saturday traveling to visit with a client in the NE on his 1982 FJ40 preservation project that I am working on.
I will be back Sunday afternoon and will be catching up.
Thanks much.
-onur
I am out of the office tomorrow and Saturday traveling to visit with a client in the NE on his 1982 FJ40 preservation project that I am working on.
I will be back Sunday afternoon and will be catching up.
Thanks much.
-onur
Last edited:
- Thread starter
- #399
I'm always amazed at the quality of some of Toyota's Japan suppliers.
Yazaki is a nice old corporation that has been around for ages in Japan:
History | YAZAKI Corporation
They have historically been associated with the manufacture of wire sets and meter/gauge assemblies as well as most all of the wire harnesses in our Land Cruisers.
The symbolic "triangle" logo can be found on a number of part components systems in our trucks.
I was with a client this weekend doing some really fun work and had some great conversations with both an old friend and a solid two decades old Cruiserhead.
When I pulled the spark plug wires from his 2F, I was blown away to see the date stamp on the wires:
1983
That means this wire set has been on this 2F since it left the Arakawara Auto Body Yoshiwata factory, out to the holding pen before it was trucked cross-town for export from the Tahara peninsula port.
32 years this wire set did its duty for this great specimen.
Yazaki continues to manufacture wire sets, meters and gauges for Toyota Motor Corporation to this day.
Two of my favorite iterations:
90919-21325: 2F engine wire set from 1980-1987.
90919-21557: 1FZ-FE wire set from 8/1992-1/1998.
Great artifacts of quality manufacturing and design.
The spark plugs had been changed. At least the PO took care of that!!
Nice survivor of the era with a brand new old school Con-Ferr and ARB bumper.
Owner had a brand NIB 8274 that he purchased in the mid-1990's. Looks great and preserves a solid element of authenticity to the time period.
He is going to keep the Warn hubs. While not a fan of the idea, it does provide a preservatory aspect to this truck.
Oh yeah, factory PS and factory AC-- old school Nippon-Denso.
Yazaki is a nice old corporation that has been around for ages in Japan:
History | YAZAKI Corporation
They have historically been associated with the manufacture of wire sets and meter/gauge assemblies as well as most all of the wire harnesses in our Land Cruisers.
The symbolic "triangle" logo can be found on a number of part components systems in our trucks.
I was with a client this weekend doing some really fun work and had some great conversations with both an old friend and a solid two decades old Cruiserhead.
When I pulled the spark plug wires from his 2F, I was blown away to see the date stamp on the wires:
1983
That means this wire set has been on this 2F since it left the Arakawara Auto Body Yoshiwata factory, out to the holding pen before it was trucked cross-town for export from the Tahara peninsula port.
32 years this wire set did its duty for this great specimen.
Yazaki continues to manufacture wire sets, meters and gauges for Toyota Motor Corporation to this day.
Two of my favorite iterations:
90919-21325: 2F engine wire set from 1980-1987.
90919-21557: 1FZ-FE wire set from 8/1992-1/1998.
Great artifacts of quality manufacturing and design.
The spark plugs had been changed. At least the PO took care of that!!
Nice survivor of the era with a brand new old school Con-Ferr and ARB bumper.
Owner had a brand NIB 8274 that he purchased in the mid-1990's. Looks great and preserves a solid element of authenticity to the time period.
He is going to keep the Warn hubs. While not a fan of the idea, it does provide a preservatory aspect to this truck.
Oh yeah, factory PS and factory AC-- old school Nippon-Denso.
Last edited:
- Thread starter
- #400
I am back in the office tomorrow and I ain't going anywhere for at least a good 3 weeks. Need some home time and I have a couple of rigs coming in for some work.
- Status
Similar threads
