tmxmotorsports
SILVER Star
What does it use from factory?
Builds BurntToast's FJ62 Build "Hoss" (9 Viewers)
- Thread starter BurntToast
- Start date
-
- Tags
- fj62
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jul 22, 2012
- Threads
- 578
- Messages
- 16,281
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
It's off the CANbus. You have to wire in a relay to the OBD2 port. With something like this:
tmxmotorsports
SILVER Star
Dang that's expensive for not much.
- Joined
- Jul 22, 2012
- Threads
- 578
- Messages
- 16,281
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
6L80e Tax 
- Thread starter
- #365
Another option is mechanical ish
www.summitracing.com
Lokar BL-1400U Lokar Backup Light and Neutral Safety Switch Kits | Summit Racing
Free Shipping - Lokar Backup Light and Neutral Safety Switch Kits with qualifying orders of $109. Shop Neutral Safety And Backup Light Switches at Summit Racing.
- Thread starter
- #366
I pulled the wires for those inside the cab, atleast for NSS with the Lokar shifter. TBD reverse light
- Thread starter
- #368
Got the airbox modified today. 2.625” to 4”. Ends up being like a 2.3X increase in cross sectional area.
Cut out the old one
Welding this thin sheet metal is a nightmare for an amateur like me.
Cut out the old one
Welding this thin sheet metal is a nightmare for an amateur like me.
Last edited:
very nice! Gotta bump this up on my list. Thanks for posting pics.
- Thread starter
- #370
Wasn’t terribly hard, I used a paper tube, cut it to fit. Then transferred that to the pipe. Lots of test fitting and grinding. Worst part was welding the .062” new tube to the .039 or less stock Toyota stuff. Blew through a couple times on my lowest setting MIG. Wish I had a TIG welder for this stuff
Idaho Savage
GOLD Star
I love seeing a modern motor under the hood but it's also a bit jarring. I love to see someone devoted to the little things to tie them together.
- Thread starter
- #372
Thanks and 100% agree. It’s nice to see things atleast attempted to look “factory ish”?
- Thread starter
- #373
Speedhut Gauges have arrived, but unfortunately they sent me the GPS speedo. I talked with Speedhut and they have no issue working the GM E38 VSS signal into their VSS gauges, so I would prefer to hardwire. Mosley hopefully can negotiate a swapout.
Found a nice tap for oil pressure gauge. Direct thread into the engine with 1/8" NPT taps for the speedhut gauges.
www.pegasusautoracing.com
Drop in cig lighter replacement. Has a USB-C charge and connection for wired carplay.
Found a nice tap for oil pressure gauge. Direct thread into the engine with 1/8" NPT taps for the speedhut gauges.
M16 x 1.5 PTFE Coated Steel Extension with 1/8 NPT Ports - Pegasus Auto Racing Supplies
Come check out our M16 x 1.5 PTFE Coated Steel Extension with 1/8 NPT Ports at Pegasus Auto Racing.
Drop in cig lighter replacement. Has a USB-C charge and connection for wired carplay.
Idaho Savage
GOLD Star
How long did they take to arrive since ordering?Speedhut Gauges have arrived, but unfortunately they sent me the GPS speedo. I talked with Speedhut and they have no issue working the GM E38 VSS signal into their VSS gauges, so I would prefer to hardwire. Mosley hopefully can negotiate a swapout.
View attachment 3621672
Found a nice tap for oil pressure gauge. Direct thread into the engine with 1/8" NPT taps for the speedhut gauges.
M16 x 1.5 PTFE Coated Steel Extension with 1/8 NPT Ports - Pegasus Auto Racing Supplies
Come check out our M16 x 1.5 PTFE Coated Steel Extension with 1/8 NPT Ports at Pegasus Auto Racing.
View attachment 3621673
Drop in cig lighter replacement. Has a USB-C charge and connection for wired carplay.
View attachment 3621674
- Thread starter
- #375
About 2 weeks
Fantastic job, just what I needed. You think this will allow enough flow still having the stick style top and tube?
- Thread starter
- #377
I think it will get pretty close. Could always cut the top open and throw a 90deg 4”. Just gets close with the hood
- Thread starter
- #378
@cruisermatt the hawks kit works, they also have one that points right, but would interfere with the connector
What where do s this kit found?
- Thread starter
- #380
LSX LS2 Engine Swap Conversion A/C Line Compressor Adapter Fitting
Specializing in 82-2002 Camaro and Firebird's, we offer everything from restoration parts, performance parts, used parts and services for all 82-2002 Camaro and Firebird's! Located in Easley, SC, we ship worldwide and also have a store front for local customers. Be sure to call or email us for...
www.hawksmotorsports.com
