Hello all. I am currently running the BP51s with 2722 rear springs. Front end was first installed with preload set at the recommended height of a petrol engine and no bull bar or winch. It had such an awful rake I decided to take it off and adjust the preload to about 8mm.
I still have a bit of rake and am wondering, instead of continuing tightening up the coil can I add the OEM strut spacer, or any spacer for that matter, to the BP51s front coilovers? Reason for wanting a little more height out of the front are to level it out and to help my rubbing on inner wheel wells. In addition I am wanting to go up a tire size from my current 285/65/18.
Thank you for any recommendations or help!
Current rake:
I still have a bit of rake and am wondering, instead of continuing tightening up the coil can I add the OEM strut spacer, or any spacer for that matter, to the BP51s front coilovers? Reason for wanting a little more height out of the front are to level it out and to help my rubbing on inner wheel wells. In addition I am wanting to go up a tire size from my current 285/65/18.
Thank you for any recommendations or help!
Current rake: