BJ73 Gearbox ID (8 Viewers)

[theMYTE]

Hi,

1992 BJ73 VM 2.5TD - I believe the synchros are going in my gearbox..

Figuring out the best move forward, rebuilding or sourcing another box (which might be in the same position later..)
I am trying to find what gearbox ID I have and if I can source one from another Toyota. Struggling to find any part numbers on it!

Cheers

 

[AirheadNut]

Looks like an H55f, but check the data tag on your firewall to confirm.

 

[DrRock]

^^This, looks like an H55f. New H55f's are available still from Toyota.

Cheers, James

 

[mattressking]

H55/splitcase.

 

[FJBen]

Some old info from Delancey, brought this up about the h55f:

The VM'd BJ73s use an F/H input shaft, F/H clutch slave, and F/H clutch, F/H flywheel.

 

[OGBeno]

Some old info from Delancey, brought this up about the h55f:

The VM'd BJ73s use an F/H input shaft, F/H clutch slave, and F/H clutch, F/H flywheel.

I'm not sure that was ever confirmed. But If any one confirmed it and went through the trouble to do so, it would have been Chris.... RIP.

 

[cruisermatt]

Yes, VM use the F/H input confirmed. I helped with installing a 2F into a VM-equipped BJ73
33030-60450 will be a direct replacement.

Not a great pic but you can kind of see the 10-spline

 

[OGBeno]

Yes, VM use the F/H input confirmed. I helped with installing a 2F into a VM-equipped BJ73
33030-60450 will be a direct replacement.

Not a great pic but you can kind of see the 10-spline

View attachment 4007186

Nice. Chris was right.