Builds Benjamin’s 3D Prints Build (11 Viewers)

[BenCC]

Ben: I've been trying not to bug you on this, but I can't find this harness or its part number. Do you have it handy?

My bad. The purchase link is here.

Toyote OEM 12” In-Cab AC 120V 400W Power Outlet Plug-N-Play Wire Harness | KTJO 4x4

PURPOSE:This is a true “Plug-N-Play” Package that will directly connect to One Brand New Toyota OEM In-Cab AC 120V 400W Power Outlet.SHIPPING:Please calculate at checkout

www.ktjo4x4.com

 

[BenCC]

I'm looking to get rid of the butterfly.

 

[BenCC]

More photos of the foglight mount in the daytime:

 

[janz3n]

Make 19 V1 Fog Light Mount (Rigid D2) (editing)

1. Overview of the Final Product

View attachment 2533188

View attachment 2536187

2 Introduction

The fin/teeth structures are designed to force air to flow through the heatsink. The fin/teeth structures are not necessary for D2 lights to work. But for 3d printed parts, it barely adds to the fabrication cost. D2 fog lights are recommended. The mount is designed to accommodate the wide light pattern (85 deg).

View attachment 2533266






3 Installation

View attachment 2533261

View attachment 2533272



3 Purchase

$150/pair
Shipping $12.1 (USPS Priority)
Lead time is 3 weeks.
PM or email Ben3DBuild@gmail.com.

Would you say this is a big improvement over stock fogs? Hard to tell and I've had zero hands on look at any Rigid lights.

 

[Kabanstva]

Would you say this is a big improvement over stock fogs? Hard to tell and I've had zero hands on look at any Rigid lights.

Those will blow the stock fogs out of the water.

 

[BenCC]

Would you say this is a big improvement over stock fogs? Hard to tell and I've had zero hands on look at any Rigid lights.

Yes. Day and night.

 

[OEMGUY0720]

Hey Ben that fog light bracket looks great on the LC. Is there an upcoming option for the Lx? I believe the LX’s fog light slot is longer than the LC, possible to do a dual-dually bracket?

 

[janz3n]

Hey Ben that fog light bracket looks great on the LC. Is there an upcoming option for the Lx? I believe the LX’s fog light slot is longer than the LC, possible to do a dual-dually bracket?

I didn’t not realize there was a difference. I’m in for a set of LX ones. I just drove through snow at night with the factory fogs and was decided on this upgrade

 

[Melf]

Just managed to finish up fitting these - Don't think I will see many other Amazons in the UK with these fitted Another great solution to fitting extras into the Land Cruisers

Now considering the Fog Lamp brackets........

 

[BenCC]

Hey Ben that fog light bracket looks great on the LC. Is there an upcoming option for the Lx? I believe the LX’s fog light slot is longer than the LC, possible to do a dual-dually bracket?

Working on LX version.

 

[BenCC]

I didn’t not realize there was a difference. I’m in for a set of LX ones. I just drove through snow at night with the factory fogs and was decided on this upgrade

Just managed to finish up fitting these - Don't think I will see many other Amazons in the UK with these fitted Another great solution to fitting extras into the Land Cruisers

Now considering the Fog Lamp brackets........

View attachment 2577378

View attachment 2577379

I mailed out a mirrored version of the cupholder to the UK a few days back. I am really curious if that fits or not.

 

[BenCC]

Removed my audio head unit this morning. Want to do something like this with scangauge and radio or something elese. This is only to show the idea.

Is there a way to connect iphone to the factory amp directly? Like a bluetooth receiver? I found these.

Amazon product ASIN B07FZ3G7SCAmazon product ASIN B078J3GTRK

 

[BROADSWORD107]

Removed my audio head unit this morning. Want to do something like this with scangauge and radio or something elese. This is only to show the idea.

Is there a way to connect iphone to the factory amp directly? Like a bluetooth receiver? I found these.

Amazon product ASIN B07FZ3G7SCAmazon product ASIN B078J3GTRK
View attachment 2577967

We have installed a couple of these in Land cruisers, they have Tablet charging so we can mount up an iPad, then this takes the place of a traditional head unit and runs everything on the tablet. Works great for Maps, music, and everything else you want to run, plus you can take your Ipad with you and plan trips

Amazon.com: Pioneer DEQ-S1000A 22W x 4 Compact Amplifier w/DSP : Electronics

Buy Pioneer DEQ-S1000A 22W x 4 Compact Amplifier w/DSP: Car Audio - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[BenCC]

We have installed a couple of these in Land cruisers, they have Tablet charging so we can mount up an iPad, then this takes the place of a traditional head unit and runs everything on the tablet. Works great for Maps, music, and everything else you want to run, plus you can take your Ipad with you and plan trips

Amazon.com: Pioneer DEQ-S1000A 22W x 4 Compact Amplifier w/DSP : Electronics

Buy Pioneer DEQ-S1000A 22W x 4 Compact Amplifier w/DSP: Car Audio - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

Does this replace the factory amp or connects to it?

 

[BROADSWORD107]

Does this replace the factory amp or connects to it?

it connects right to it. it basically replaces your radio. so you have to get a couple of connectors for the wiring, but it's less invasive and uses the same setup.

 

[BenCC]

it connects right to it. it basically replaces your radio. so you have to get a couple of connectors for the wiring, but it's less invasive and uses the same setup.

I see. It is a receiver and pre-amp. Thanks.

 

[BROADSWORD107]

I see. It is a receiver and pre-amp. Thanks.

yes! and it works great! especially if you are converting to having an iPad/ iPhone as your main source of music or maps anyways.

 

[KillerBox]

Can anyone tell me where the two plastic pieces are supposed to go on Ben’s front cup holders?

 

[KillerBox]

These two plastic pieces

 

[BenCC]

These two plastic pieces

View attachment 2580867

These pieces are not components of the cupholder hahaha. These are M24, which you can glue to fix the broken window switches.

Builds - Benjamin’s 3D Prints Build

Thanks for the reply! I agree with you on point #2. Not having to finish the piece is a huge value-adder for me. With regard to #3, I think there's a design opportunity there to create a front bucket "face" and a rear backing plate, just like the M2V2. The actual headlight adjuster brackets...

forum.ih8mud.com