Builds Benjamin’s 3D Prints Build (17 Viewers)
- Thread starter BenCC
- Start date
-
- Tags
- build build thread
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
These are from the fog light in my 2000 LX470. The one without the red gasket is attached to the bulb side. The one with the red gasket is attached to the wire harness.
Last edited:
Hi Ben
Yeah, went through all of them, found lots of stuff I never realised I needed…
I’ll email you shortly with the order request.
Couple of questions here though…
Are you planning to make the LED fog light mounts for LC/LX using the BajaDesigns Squadran-R SAE lights?
Squadron-R SAE LED Auxiliary Light Pod Pair - Universal - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike
Baja Designs next generation Squadron® SAE is the perfect road-legal auxiliary fog light on the market today. Engineered with all-new aspheric projector optics and with our advanced LED technology provides a performance increase in luminous flux of...
www.bajadesigns.com
Can you use these Stedi switches in your designs? I believe they are OEM Toyota sized at 39x21mm and pretty sure I read you can use OEM switches.
STEDI Tall Type Push Switches to suit Toyota
Tall Type Push Switches to Suit Toyota. Blue LED Back Lighting Upper Light is Active when Power is ON, Lower Light is Active when Dash Lights are ON. Laser Etched print ensures our print will never rub off with use. Rated at 3A on 12v. Excellent OEM matching design.
stediuk.com
Finally, what software do you use or would recommend for someone to get started on? I’ve used used SketchUp and Shapr3D a little.
I’ve got an old BMW e30 coupe and a few other projects where 3D printing could be really useful.
Cheers
James
BenCC
Supporting Vendor
- Thread starter
- #3,184
Thanks.Hi Ben
Yeah, went through all of them, found lots of stuff I never realised I needed…
I’ll email you shortly with the order request.
Couple of questions here though…
Are you planning to make the LED fog light mounts for LC/LX using the BajaDesigns Squadran-R SAE lights?
Squadron-R SAE LED Auxiliary Light Pod Pair - Universal - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike
Baja Designs next generation Squadron® SAE is the perfect road-legal auxiliary fog light on the market today. Engineered with all-new aspheric projector optics and with our advanced LED technology provides a performance increase in luminous flux of...
Can you use these Stedi switches in your designs? I believe they are OEM Toyota sized at 39x21mm and pretty sure I read you can use OEM switches.
STEDI Tall Type Push Switches to suit Toyota
Tall Type Push Switches to Suit Toyota. Blue LED Back Lighting Upper Light is Active when Power is ON, Lower Light is Active when Dash Lights are ON. Laser Etched print ensures our print will never rub off with use. Rated at 3A on 12v. Excellent OEM matching design.
Finally, what software do you use or would recommend for someone to get started on? I’ve used used SketchUp and Shapr3D a little.
I’ve got an old BMW e30 coupe and a few other projects where 3D printing could be really useful.
Cheers
James
Not going to support Squadron-R for dual LED each side. For single LED each side, it is possible.
I can accommodate these switches.
I use Solidworks. I have a permanent license. All industrial 3d softwares are capable of handling 3d print design.
Fusion360 is a great program with a lot of tutorials on YT. You can also get it for free for personal use.Hi Ben
Yeah, went through all of them, found lots of stuff I never realised I needed…
I’ll email you shortly with the order request.
Couple of questions here though…
Are you planning to make the LED fog light mounts for LC/LX using the BajaDesigns Squadran-R SAE lights?
Squadron-R SAE LED Auxiliary Light Pod Pair - Universal - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike
Baja Designs next generation Squadron® SAE is the perfect road-legal auxiliary fog light on the market today. Engineered with all-new aspheric projector optics and with our advanced LED technology provides a performance increase in luminous flux of...
Can you use these Stedi switches in your designs? I believe they are OEM Toyota sized at 39x21mm and pretty sure I read you can use OEM switches.
STEDI Tall Type Push Switches to suit Toyota
Tall Type Push Switches to Suit Toyota. Blue LED Back Lighting Upper Light is Active when Power is ON, Lower Light is Active when Dash Lights are ON. Laser Etched print ensures our print will never rub off with use. Rated at 3A on 12v. Excellent OEM matching design.
Finally, what software do you use or would recommend for someone to get started on? I’ve used used SketchUp and Shapr3D a little.
I’ve got an old BMW e30 coupe and a few other projects where 3D printing could be really useful.
Cheers
James
mdcoa
SILVER Star
Hi Ben!
Any chance of an M2 V1 LEFT?
Any chance of an M2 V1 LEFT?
Hi, how can I order these?
I wonder if anyone else is like me and is dying for this with Ram Ball in the middle so I can mount an iPad with an arm for my kids in the back and have the screen raised up and centered. Ram ball in the middle for IPad and then Ram ball on each end for cup holders and then 2 USBs or 120v in the other two slots for charging phones and iPad would make this THE ULTIMATE “Kids 2nd row”. If this is ever something you decide to do I’ll be your first customerMake 29 V1: Second-row Cupholders Replacement
1 Overview of the Final Product
View attachment 2355623
View attachment 2355601
View attachment 2355605
2 Description
M29 is to delete the second-row drawer/cupholders and set up a power distribution hub.
The bracket connects the factory panel to the rigid factory mounting points, providing a solid base for the faceplate.
View attachment 2355612
The faceplate is customizable on CAD level to fit various devices.
View attachment 2355616
V1-V5:
A potential use of RAM ball mount:
RAM Diamond Ball Base:
120V Outlet
- Size B (1.0 inch) Aluminum: Amazon or RAM-B-238U
- Size B (1.0 inch) Composite: Amazon or RAP-B-238U
- Size C (1.5 inch) Aluminum: Amazon or RAM-238U
12V Socket
- 85530-35050-C0 and its Wire Harness (In-Cab 120V 400W Power Outlet Wire Harness - https://www.ktjo4x4.com/collections/in-cab-power-outlet-products/products/toyote-oem-12-in-cab-ac-120v-400w-power-outlet-plug-n-play-wire-harness-1)
3. Purchase
$150
PM for paypal info.
What you get:
- Bracket
- Faceplate
- Fasteners
- 12V socket installation tool (Need this tool to install the threaded ring)
BenCC
Supporting Vendor
- Thread starter
- #3,192
Sure. I can do it. Stay tuned.I wonder if anyone else is like me and is dying for this with Ram Ball in the middle so I can mount an iPad with an arm for my kids in the back and have the screen raised up and centered. Ram ball in the middle for IPad and then Ram ball on each end for cup holders and then 2 USBs or 120v in the other two slots for charging phones and iPad would make this THE ULTIMATE “Kids 2nd row”. If this is ever something you decide to do I’ll be your first customer
I have a brand new Make 5 (Scanguage II mount + 2 rocker switch panels) in gray I didn't end up using. I installed two rocker switch blanks but never installed the Scangauge II. Anyone want this, how about $75 shipped? I'll also throw in the ethernet extension cable and adapter recommended for install that I also purchased but never used (~$15 at Amazon).
So which Auxbeam panel does this mount hold? Looks like there is a "compact" 8 panel switch and an XL 8 panel switch that is slight larger. See Auxbeam Switch Panels | The best way to control your electrical access.
