Anyone here running a turndown instead of a tailpipe? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

1920776


Slight drone
 
I have a turn down just like this
1920785


But I have a factory muffler at the factory location. Being running like that for year and I have not had any issues
 
This is what I have. Magnaflow y-pipe, magnaflow second cat, bosal muffler. No drone at all, it's a super quiet exhaust from inside the cabin. Absolutely love it.

MpXpP35.jpg
 
I’ve got mine dumped right after the axle. I was kind of forced to after I replaced my muffler. My plan is to get a replacement tail pipe and fix it but it works great for now.
 
Be careful of where your exit is if the heat goes to the wrong spot it can melt your tail light and wiring harness. A friend found that out the wrong way
 
Not the best pics, but I added an additional hanger and slightly turned down tip. No droning and it runs along the frame rail, so it can be scraped, but not crushed.

1921536
1921538
 
Could have done the 'chicken soup' fix to get you through until it warms up, an empty soup can with the top and bottom removed and cut down the side and a couple hose clamps as a splint has gotten me many a mile. It's popular up heah in the rust belt. And the cans are galvanized so they can sometimes outlast the exhaust pipe.:meh:

I cut my rear resonator off and stuck a NAPA turn-down on the cut pipe so it wouldn't interfere with my 4x4 Labs rear bumper. Never thought of running it over the frame and down, that is pretty cool though:smokin: Now my Bosal muffler is rotting through and the cut tailpipe is looking pretty crappy after only a few winters. The NAPA tip only lasted two winters.

Damn rust...:crybaby:
 
Last edited:

Users who are viewing this thread

Back
Top Bottom