Where did you find that weld on bracket. It looks good.
Builds '97 LX450 - Build it, break it, wheel it, fix it! (2 Viewers)
- Thread starter Noahrob
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #322
There are several models, and I know a lot of guys run the double pass with 1/4 npt and no issues, but I like the 3/8 opening and asingle pass, less restrictions....might be irrelevant and remnants of my Chevy days, but fluid starvation is a pump killer.
It’s time to buy yourself a Hypertherm plasma cutter. I have 30, their little guy, since 2011. It’s been a great machine.
Plasma, waterjet and laser cutting systems from Hypertherm
Hypertherm makes industrial cutting systems, software, consumables and accessories. Information available in 11 languages.
I have the same one, nice little unit
But I still used the same bracket the Noah has, some thing are just faster and easier to buy per made. I also think 1/4" would be over kill for that application.
I did just use it to make these for some armor I'm working on
But I still used the same bracket the Noah has, some thing are just faster and easier to buy per made. I also think 1/4" would be over kill for that application.
I did just use it to make these for some armor I'm working on
You are working on a vehicle that Toyota went overkill on. Go over kill or go home….. Hey, I don’t have that nice Hypertherm storage case. Didn’t know they existed.
Last edited:
3/16 is over kill for that bracket !!
Good times ahead….
- Thread starter
- #332
Its funny how things work out, I had some free time today and thought I would get a ton done, but now that Im inside on the computer and think back about what I actually did, where did the time go?
That looks like 2, maybe 3 hours of work to me, but alas, it was 5!!!
- Got out my tools, setup the work bench outside, ran power, etc...
- Removed and replaced steering box
- Removed and replaced reservoir (and made a little bracket)
- Cut down and welded the hydro ram bracket
- Figured out where and how I want to mount my cooler and made a little bracket
That looks like 2, maybe 3 hours of work to me, but alas, it was 5!!!
- Thread starter
- #333
Now that I think about it a bit more, I think I lost a lot of time measuring, thinking, contemplating, planning, and then remeasuring because I forgot to write anything done...bwahahaha. Also, I spent some time making arrangements to get a friend for this guy.
Everything takes me 3 days to doIts funny how things work out, I had some free time today and thought I would get a ton done, but now that Im inside on the computer and think back about what I actually did, where did the time go?
- Got out my tools, setup the work bench outside, ran power, etc...
- Removed and replaced steering box
- Removed and replaced reservoir (and made a little bracket)
- Cut down and welded the hydro ram bracket
- Figured out where and how I want to mount my cooler and made a little bracket
That looks like 2, maybe 3 hours of work to me, but alas, it was 5!!!
You got a lot done in 5 hrs!
- Thread starter
- #336
This is the kind of sh*t that makes me crazy.
What size is the fitting according to the paperwork in the box? 3/8 npt to 3/8 barb
I wanted to use 90 degree fittings, so got 3/8 npt to 3/8 barb
Hmmm....do they look the same to you?
What size is the fitting according to the paperwork in the box? 3/8 npt to 3/8 barb
I wanted to use 90 degree fittings, so got 3/8 npt to 3/8 barb
Hmmm....do they look the same to you?
Take a deep breath Bro. Sh*y drives me crazy tooThis is the kind of sh*t that makes me crazy.
What size is the fitting according to the paperwork in the box? 3/8 npt to 3/8 barb
I wanted to use 90 degree fittings, so got 3/8 npt to 3/8 barb
Hmmm....do they look the same to you?
Picture not coming through.But, on the plus side, my XR got a friend..
Haven’t been able to figure out why some of my pictures do that
Last edited:
