69 fj40 wonderbread thread (1 Viewer)

[smooresfab]

So this arm isn't spring less currently on the toyota and please exposing to me how this helps death wobble

 

[smooresfab]

Oops u already told me

 

[boots4]

Are you planning on wrapping that big U-bend exhaust under the hood? That will be a lot of area to radiate heat so I hope you're planning to wrap it.

 

[smooresfab]

Wasn't planning on it but its a good idea ill put it on my list of importance some where down the line.

 

[v8troopie]

nice build. are you going to build some sort of tray or something for the rear

 

[smooresfab]

Rears going to be redone truggyed out later with a tube bendee

 

[smooresfab]

Got my ram installed Psc my ram assist today 1 and 3/4

 

[smooresfab]

Still got death wobble after ram install not as bad but the wheel wobbles I thing its the bearings

 

[GLTHFJ60]

Still got death wobble after ram install not as bad but the wheel wobbles I thing its the bearings

What are caster and toe set to?

 

[smooresfab]

Toe is zeroed out no in or out caster is fine. I pushed and pulled on the tire and watched in the inside my rotor disc moving slightly

 

[fj80ontons]

are u gonna try a set of the springless steering arms, they are the only way to set kingpin preload with big tires

 

[smooresfab]

More than likely do u know what the prepossessing pressure is supposed to be

 

[smooresfab]

More than likely do u know what the preload pressure is supposed to be

 

[smooresfab]

More than likely do u know what the preload pressure is supposed to be. On a side note got my dash cluster panel from trailcandy.com took a while to ship beacause of holidays but its finnaly here

 

[smooresfab]

Installed

 

[smooresfab]

I tried the washer trickput 1/4 of washers on top of my springs on my kingpins and it didn't seem to do any thing I'm not getting death wobble since I put my ram on last weekend but its just making the problem I look out the window and can see my tire wobble and it gets worse with speed I can't quite afford. The springless arms. Right now. But even still I'm starting to think its my wheelbearings loose

 

[smooresfab]

First wheeling pic

 

[xxsilveradoxx]

F40& mud= pizza& beer

4link for use joint size 2,63 or 3".?

 

[smooresfab]

1.25 link joint size

 

[FJ40 PTO]

What the heck?

I just saw this on ebay!? You've done a great job on it. Do you still have the death wobble?