Parting Out 1992 FJ80 with Good Engine Trans, Body Etc. REAL CLEAN

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

No I don't. FYI I have used ABS knuckles with the sensors in them, but no sending ring on the birfields.
 
See personal message
 
what are you looking to get for the long block, and or the cylinder head?
 
Both have been sold.
 
DO you have the front pass. bumper cap? I need one in great shape that bronze color for my 94 LC also the read drivers taillight. Both have to be in real good shape on a restoration that is in the body shop.
 
No bumper cap. My tailight is a 7, and a restoration needs a 9+ to 10.
 
Looking for PS pump, steering gear box, and rear third member (or better yet, entire axle assembly) for 1991 fj80 shipped to 85719. thx!
 
I have complete rear axle $250, or third member $150 + shipping. It is out of a great running 1991 that I bought for the engine and transmission. If shipping the whole axle, please make your own shipping arrangements and I will put it on a pallet and deliver the axle to your shipper. If third member, will ship FEDEX or Fastenal at actual cost. OR consider using MUDSHIP on IH8Mud to find a ride for it.

The PS pump is an external pump for that year and I do not have one in stock. No steering boxes either at this moment
 
Am currently looking for front, driver fender. Potentially a front control arm and front sway bar depending on a pending local sale. Are these available?
 
So Cal
I have removed only the following: seats, carpets, door panels, radiator, battery box, gas tank, tool kit, rear upper hatch, washer bottle, grille, front bumper and headlights for my own use.

MOST OF THE CAR IS REMAINING, and Is complete and in XLNT CONDITION

The valance is still available as are the hood, corner lamps, turn lamps, fenders, doors, tailgate rear bumpers, driver seat belt, etc. It has a Good one piece radiator shroud, not broken!

The 3FE runs strong, starts well, shifts well, steers well, etc. Exhaust is in good condition as well. No Check Engine Light, and all sensors and engine accessories are in place and functioning

SEt of 5 - 15" Aluminum wheels with caps. (same wheels are used on 4 Runner and Tacoma)

Color of body is White with Grey Interior. I also have many body, interior, and mechanical parts from 1993 - 1997 from other Cruisers I have parted out in other colors with both brown and grey interiors, but no seats other than a near perfect pair of Third Row Grey Seats.

It has a new set of shock absorbers on it - Looks like KYB shocks from the color.

It has aftermarket running boards.

PM for prices and parts availability and shipping arrangements. Paypal OK
 
Grey or brown?
 
I can shred one up so it will look normal, but don't have a good one right now for the driver side in grey
 
I'm looking for a "White" rear driver side door fender flare for a 93. Do you possibly have one?? Will the 91-92 fit correctly?

Thanks

Chris
 
I have a rear driver side door fender flare, but not in white for a 93 in good condition. Each half is $35. I use Duplicolor Exact Match Toyota Spray to paint my flares. I have a white 94 and I have replaced each flare, one at a time and used that paint which sells for $5.95 to do a perfect match color white.
Do you need both halves or:
Half that mounts to the rear door
Half that mounts to the rear quarter panel
 
Thank you for replying. I'm going to keep looking for a white one for now. But, if I can't find it I'll give you a shout.

Thanks.

Chris.
 
No worries. FYI 1991-1992 flares are different and narrower, 1995-1997 flares are different. Stick to 1993 and 1994.
 

Users who are viewing this thread

Back
Top Bottom