I am looking for a column shift 3speed top plate to go back to shifting on the column and most and formost and a 2f air cleaner. I might even try to modify an f air cleaner.
Edit: Waiting to see what a facebook market place guy says on separating the top plate from a 3speed to buy just the top...
I’m attempting to disassemble my steering column to install a bushing (currently it’s loose in the firewall with a big gap). But I don’t know if I can get the shaft out? Should I be able to slide the ignition switch piece up toward the wheel? First pic. The FSM seems to skip some steps.
The PO...
So, I'm posting this here since I didn't come up with any good results when I searched. I spent way too much time trying to figure out the numbers on the bearings, too.
After removing my steering wheel for some R&R, I decided to see what conditions some of the bearings in my steering column...
Howdy,
I have a later model (don’t actually know the year, but I know it’s from the latter runs) FJ55 steering column. I bought this piece by mistake. It works fine, just wasn’t what I needed.
Does not come with the steering wheel, turn signal assembly or column cover (around the switch and...
I apologize in advance if this isn't the right way to ask a question. I haven't posted much on IH8Mud. I am starting a body off restoration of my 1970 FJ40. It is all original with a 3 on the Tree. Are there any good resources out there for videos or documentation on how to remove the shifter...
Hi everyone. I have an 83 bj40. I have most of the PS parts needed, but would like to find a PS column/shaft and a set of hard cooler lines too, if possible. It's fine if the cooler lines are in bad shape. ( I know, hard to find)
Thanks LMK.
Decided to replace the steering column in my 92 (had to replace upper bracket for ignition and thought replacing the whole shaft would be faster then messing with the tamper proof fasteners that retain the bracket) the donor column came from a 94. Problem is the spindle for the Upper shaft that...
Just replaced these and I'd be happy to send them to anyone who wants them for the cost of shipping. Came off a 1994 KZJ78 but I'm guessing these fit other models as well. Lots of shadows in the pics of the sun visors, they aren't too bad of shape.
I'm in Okinawa Japan but can send these...
Don’t want to ship this. Extremely heavy.
What is in the picture is what is there. I don’t have and linkage. Came out of a 65’ that was swapped to a floor shift 3-speed. Make an offer.
Like a lot of others the motors have gone out on my steering wheel. I’d like to “set and forget” the tilt. It’s currently too low for my comfort.
I’ve seen several videos re the telescoping motor, and how it’s on a worm gear you must adjust manually before installing a new motor. Can’t seem...
Hey All:
Searched the forum and didn't come up with much regarding this topic.
I have some bad clunk and a lot of play/binding in my steering column. I've been chasing this steering issue for a while, but I think I finally have it nailed down to the Steering column uJoint (Upper) and...
Selling a nice pair of visors removed from an 86 FJ60 with gray interior. Includes the pieces that the visors clip into and the six mounting screws price $44 for the pair. Also have a nice gray clamshell price $35. Buyer pays shipping. Best to email me shmukter@pa.metrocast.net