No affiliation....
Just thought somebody might be interested...
http://www.carmax.com/dyn/factsheet/factsheet.aspx
Other Vehicles
Classifieds: Jeep, Land Rover, Chevrolet, Ford, Dodge, Nissan, etc
Filter by prefix:
.
Filters
I know what most people on here are looking for, but I figured if anybody had a wife/kid/brother/etc. who needed to get good gas mileage... (+/- 30mpg)
Just picked up a '98 LC and this one's got to go:
2001 Mazda Protege ES 2.0 Litre
75,xxx miles
5-speed manual trans.
16" Alloy wheels
Power everything (except seats), Keyless entry
Champagne Gold ext. / Gray int.
Recently appraised by Carmax: "Runs fine and shows well". No issues.
Clean Carfax report.
$6,999 or make me an offer.
(I'll also work with you on shipping/delivery if you're out of town.)
See here for contact info and a pic...
I'm selling my wifes 1978 GMC Jimmy. It has a 350/TH350/203 with a Dana 44 front and 12 bolt rear (3.08 gears and unlocked). The truck is in good shape, but it has some typical GM rust and the driver side rear tail light was hit, bending the 1/4 panal a bit. The tailgate does still open and close. It has a new Quadrajet carb and the truck runs really well. It does leak a little, but not much (most of the leaks have been fixed). It has 33x12.50R16 Super Swamper Trxus MTs with 16x10 black steal wheels (60-70% left) and has a 2.5" lift on it. The truck also comes with a 14-bolt rear, a spare Dana 44 front that needs axles and hubs (Both are 3.73 geared and unlocked), 4" front lift spring and 4" rear blocks and a York compressor with...
I saw this M762 for sale on government liquidation.com
http://cgi.govliquidation.com/auction/view?auctionId=978444
For those of you that want the chassis of an M416 but the flexibilty to build your own body/tub here is a good opportunity. The M762 is a rated at 3/4 ton, a 1/4 ton more than the M416. It was designed to carry small generators. The trailer has three lunnette positions, the tall part on the tounge is the third position so the trailer could be pulled by taller trucks such as the M35 "Duece and a half". I have personnal experience with an M762 at my last duty assignment. We basically turned it into a cargo trailer by adding a plywood box on top and removeing the third lunnette position (interfered with HMMWV hook up) worked...
Located in Omaha Nebraska.
1995 SR5 Extended Cab 4x4 truck w/ cap. 3 liter V6 w/ only 81,000 miles, have owned since 49,000 miles and only used Castrol Synthetic oil. No rust. Runs great, needs nothing. Must see to appreciate. New battery in last year. Will have new muffler and tailpipe before purchase. Cruise/tilt/AC/roof rack/bedliner/slider rear window/trailer wiring/pop-out side windows. Pictures at: http://s89.photobucket.com/albums/k221/vwcampin/95%20Toyota%20Truck/
contact email @ vwcampin@lycos.com or 402-554-9135
$6900 OBO. Must sell so make me an offer
Thanks
Sorry not sure if anyone is interested but I need to get rid of it fairly quickly so I though I would post here..
It is a green '94 Ford Van that is originally a Texas truck so it is in pretty much great shape with no rust... Also perfect mechanical shape, AC works and everything... Interior is very good, it has interior material that goes all the way back so it is insulated.. It is a great cargo OR passenger van OR both! This is because it has a removable rear wall that goes in just behind the second rear seat.. This keeps all your cargo / camping stuff / whatever seperate. Then it has two rows of captains seats, the front row, then a second row behind the main row but again these are removable.. It also has a high...
Hi all,
Looking for a BJ/HJ 60 diesel in Ontario area. Prefer stock condition. No show winners. Something that can still be put on the road. I don't mind getting my hands dirty.... Let me know what you've got...
Thanks
Eric
Looking for a cancer-free BJ70. Willing to import. Within a 3-day drive of NH is a big bonus. Lockers and AXT Turbo also desired.
Thanks...looking forward to joining the ranks.
Tom
I am looking for a flat bed car hauler. I prefer 18' but will entertain 16'-20'. It must be able to haul at least 5500lbs. Bumper pull is mandatory. Thanks
1990 Hilux Surf RHD (4Runner)
2.4L Turbo Diesel,5 spd
Pwr windows,locks,mirrors
Factory Toyota winch/bull bar
Eclipse Satellite/Ipod ready CD
24000 Orig K
A couple scratches otherwise perfect shape
$13800 cdn OBO
Call (250) 334 0376
(250) 218 2666
Found this on another website, no affiliation.
40th Anniversary Limited 1997 Toyota Land cruiser 132k miles 4x4. Driver Air Bag; Anti-Lock Brakes; Air Conditioning; Alloy Wheels, and all terrain tires; Cruise Control; Compact Disc Player; Passenger Air Bag; Rear Window Defroster; Power Seats; AM/FM Stereo Cassette; Leather Seats; Power Door Locks; Power Mirrors; Power Windows; Power Steering; Sunroof/Moon roof; Tinted glass, tilt wheel. Asking $11,900. for more info call 760-807-3885. Encinitas, California, 92024
Anyone seen this yet?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=290029188057&ssPageName=ADME:B:EF:US:11
Might be worth looking at, but too far from me.
1985 sj413 suzuki samurai 1.6l 4 inch lift 33 inch mud king tire on 12inch wide rim
power steering newer clutch installed before i bought it frame is super solid no rust upper body a bit rusty solid floor no holes no rust on floor that i can see apparently guy i bought from said engine had 25000 km on it i was kind of skeptical but it is solid burns no oil and has tons of power 5:13 gears locked rear diff solid truck driven daily new rear brakes new fuel pump new rear bearings have sweet honda prelude seets to go with it
it was built in ottawa valley where they know how to build samurais
needs brake lights rewired
shocks are getting soft
in north bay ontario
9000lb ramsey winch goes with it it is custom reciever mountable...
I posted my 93 80 on ebay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320027519618
in case anybody is interested. N/R 3500 start price..
Thanks,
Erik
2003 Subaru Forester $15k green (not like a mint, like a tree) good condition will post pics but would like to gauge interest. Located in TN, call or write. 423-313-0775 or ross-george@utc.edu good car but we are moving and there wont be room for it, it has 60k on it. this is the only place it is listed.
I know, I know it is a heep, but it is a friend's so I am posting for him. Actually it has a chevy engine, so that makes it a Cheep :D . anyway it is a cool ride. here it is.
350 Engine and 350 Auto Trans
Dana 300 Transfer Case
14 Bolt rear end
Dana 44 Front end
New 431 Gears & Detriot Lockers front and rear
New 36" Super Swampers and rims
Crossover steering
the asking price is $5000
PM me and i'll get ya contact info
This is in Placerville, CA
A friend of mine is selling his mud bogging/sand drag 40. All of the details can be found at http://www.planet4x4.net/forums/showthread.php?t=4792 . I've never rode in it since the BIG big block went in it. But I rode in it once with the old motor and it was basically like owning your own portable amusement park. 8,000 rpms of big block power is insane. I'm really sad to see it go as it has been really a lot of fun following it over the years. If you are serious about mud bogging and want to do it in Cruiser style this is a turn key way to start.
Eric V.
1997 Jeep Wrangler TJ For sale
4cyl 5spd NP231
3" BDS lift including lower control arms
33" Kuhmo race cuts with good life left
15" black steel "D-window" wheels
8.8" rear differential with disc brakes
4.88 gears front and rear
Warn rear bumper with reciever and stud for tire carrier
Am/FM aftermarket radio with cassette and two 6x9 speaker boxes.
Soft top and half doors
No rust, one grille dent (prior owner hit a turkey, great story, no big deal on the dent you have to look for it)
New radiator, new thermostat
Regular maintenance, new fluids in differentials, T-case, Trans and oil change.
Clutch is good, brakes are good, universal joints are good
124xxx miles, less than 3000 miles since bone stock one owner...
I have a 2001 XR650r supermoto bike that was never a dirt bike , I was owned by a honda dealer that started the conversion and I finished it !
The Machine has a clean title and can be registered in any state .
The bike has over $12,000 in it !
Custom pro-action suspenshion ...lowered 2 inches .
Honda HRC Piston and cam performance package .
BRP Tripple with scotts sub mount steering dampner .
Protaper bars 1 1/8 with protaoer roller throttle tube .
Promotion controls
Summer fork clamp and case saver .
Excell 17 inch polished supermoto wheels with Talon hubs .
Michellin tires front a back ...160 rear .
320 front rotor with brake conversion .
Baja designs conversion .
lot's of other parts and accessories to go with the bike .
I'm...
As stated I have two sets of cable locked axles, all cables FF complete.
BC Canada
4K per axle set including everything..
Landed here in Canada in two months.
Rob
If this guy sells it for his asking I want the guys name, I have a pile of dog poop for only 500.00.
http://cgi.ebay.com/ebaymotors/Project-Toyota-Land-Cruiser-body-and-chassis_W0QQitemZ120025812770QQihZ002QQcategoryZ6783QQrdZ1QQcmdZViewItem
82 1 Ton Chevrolrt 3+3 , 454, th400, 205 , 14bolt, dana 60.
truck has 1990 front clip, chrome Warn bumper,auto meter gauges( tach/water temp/oill pres/and trans temp) truck sits on 5/6 inch lift with 35 inch bfg all terrain tires. Truck runs strong, however it will need some work. engine is getting up there and should be rebuilt, trans is great but just started leaking,axles are all good with no leaks and all new brakes.
All in all this would be a great truck if someone just put a little work into it.
asking 5500 for it ..... OBO.
http://albany.craigslist.org/car/183557805.html
no pic...just thought i would post these if anybody was looking :)
Thread Filter
Latest posts
-
-
-
-
-
How do I replace outer flange studs on 94 FJZ80 Land Cruiser? Is there a special tool? (15 Viewers)- Latest: reklund5
-
-
-
-
-
-
-
-
-
