1972 Landcruiser FJ40. Clean title. asking $22,500.00
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
63 rolling chassis, factory soft top body. Very little rust. Tailgate, spare carrier, and toolbox under seat operate smooth. I have a 2f engine and transmission, not original, to go with it.
The engine is not installed. This is a good solid body and frame for a project.
Asking $6,500
Needs some love and has a SBC.
Toyota FJ40 1965 ...PRICE REDUCED
This looks like an OK deal ($6,700). Would make a great weekend toy!! I wish I had room and the money for 10 of these :rofl:!!
Here is the CL listing
1978 toyota fj40 land cruiser
For sale or trade,78 Toyota fj40 landcruiser,With clean title. inline toyota 6 cylinder,manual 4spd hard top and hard doors runs drives stops,it has a full roll cage front and back ,rock sliders.body is good except the rear of tub as they were infamous for rust.Front has locker but I have new stock gears to go back in as well as a stock front drive shaft it has a heavy steel one in it right now .the lights and signals do not work haven't gotten that far yet so I don't know why.needs some restoration but everything is there except the back hatch.I basically...
1976 FJ40
Located in Knoxville, TN
Priced $27,900
When I sold this truck to a fellow mudder in 2015, we called her Ol’ Blue! She was an original paint FJ40 with some retro hand painted pin stripes. Spent most of her life in Colorado with a retired mechanic. She had some minor rust in the rear quarters and rear sill but it wasn’t too bad. I have photos before and after.
Since then, her current owner has invested more than $15,000 to make her into what you see today. The rust was cut out and metal welded in. She received a new paint job, original color inside and out, new upholstery, headliner, Tuffy locking console, new tires, Weber carb and more.
This FJ40 has her original drivetrain, suspension, 2F engine and 4-speed manual...
Hi,
I'm looking to purchase this fj40 and wanted to get your opinion if I should pass on it or it's worth purchasing. Seller is asking for 11k and willing to deliver it. The fj runs and drives but has been on non op due to being a spare hunting vehicle. It looks to be repainted to beige from the original white color. I'm looking for an fj I can take out on the weekends and take the family camping with. So I need it to be safe and reliable. I'm located about 7 hours from the seller so I'm unable to see it in person.
Thank you for all your help.
WTB FJ40 Late 79' to 83' Matching Set of Gray Front Seats Complete! Only interested in good to excellent condition! Looking for Gray only! Must be willing to box and ship! Thx!
It is titled as a 63 but the VIN indicates it was built in 62. 94360 on the odometer. The engine is in great shape, starts easily. Carb was rebuilt. The transmission is a 3 on a tree. Clutch is good. Clutch master cylinder has been replaced. The transfer case needs to be replaced, there is a hole in the bottom of the case. Brake master cylinder has been replaced, brakes work well. Replaced the lines with stainless. Seats are all there but need to be recovered. No holes in the floor pans. Only rust is on the surface. One dent on the left rear. Headlight switch burned out. I do have a replacement. Lights all worked before that. Prior owner put an aluminum top on it and homemade soft doors. The original soft top bows are attached...
No Longer Looking!! Proud new owner of a '78.
Wanted ads do work. I was contacted by a mud member with a 78 that he was willing to sell (but it was not listed in the classifieds).
I bought a 95 YJ Wrangler a few years ago, but I've regretted not getting an FJ40 instead. I'm ready to upgrade. I've been a little curious if Wanted ads actually work, but I guess I've got nothing to loose.
My budget is $7,500 - $10,000
Ideally I would find one within a days drive of Little Rock, AR
Obviously at that price range I'm okay with some rust, but I really don't want any rot unless it's a piece that I could replace easily (front fender, hood, etc)....I don't want to mess with welding.
I rescued this FJ recently. I felt it was my civic duty. It had been sitting in storage for 8 years just wasting away. I towed it back to the house to check the vitals. It was pretty dehydrated so I gave it a few days to rehydrate and low and behold it started back up. I expected to see oil and various fluids spew all over the garage floor but it idled comfortably and no leaks. These engines are amazing.
I'm debating on whether to sell it to someone who will take it to the next level or put some money into a new paint job and minor body work. Most of the rust is surface except for the rear sill which will need to be replace. I know prices are going up and are over the place. I know this is not an exact science but what could...
Don't have time to do this project right, so she needs someone who does. I'm the 3rd owner. Majority of her life was a hunting/work truck in Idaho. Second owner bought and flipped her to me. I drove her daily in southern California for nearly a year, and then the head gasket went. This was my first project, and I'm admittedly out of my depth getting her to run properly again (runs rough and dies at idle).
Truck is near complete, but needs some body work on the usual suspects of rust spots. Here's a good accounting of what she has going for her, and what she doesn't:
The Good
F Engine manufactured in '72 with 4 speed transmission
Rear seats in great condition
Tires have low miles
Replaced hoses while replacing gasket
Cap and rear gate...
This is NOT MY RIG.
I can't believe I am going to pass on this one, as I have first dibs, but I just can't take on another project right now.
It's in great shape as far as rust goes, missing axles however. Guy (name is Eric) has a loader, so all you need is a trailer.
It's too nice to part out, but you could easily part it out and make some $$.
This is too good to pass. He does have the engine, but it's not in it, and is exposed to the elements.
Your welcome... Tell him Angelo sent you... :)
1974 fj40
Hello, new to the forum as I'm trying to get a little more exposure to my '83 FJ40 I must sell. Please check out my eBay listing to read the full history and see over 80 pics. Feel free to contact me via this forum or eBay (contact info listed in ad) if you're interested. Asking $39,000, but open to reasonable offers. Thanks for looking.
Cheers,
Kyle (moby33)
Toyota : Land Cruiser Base Sport Utility 2-Door
Saw this on Craigslist. No affiliation. Already in the states so it's a pretty hassle free purchase for you US folks. Rust looks doable. Don't hold me to that by the way. Remember It has lived in Seattle.
1980 Toyota landcruiser BJ40
Cheers
g
I'm selling my 40 on BaT if anyone is interested.
I'm looking to buy a 1975-1982 North American Spec FJ40. I'm looking to spend between $12-$18k
I'm on Long Island and willing to travel in the Mid Atlantic to New England areas for the right FJ.
My number is 631 484-six 3three 7.
FJ has GM 350 motor and transmission, ABR lockers, warn winch, air tank, custom roll cage, dual shocks, good paint, simpson seats, new gauges, K&N air filter, 37" Goodyear wrangler MT+85% tread, everyday driver that runs great, no rust, bikini and soft top only with best top doors
I have a 1980 BJ40 and am in need of the copper heater pipes that pass through the firewall into the passenger compartment.
Thank you ahead of time for any assistance in this search!
Mark Miles
FOR SALE - My price is based on fair market value for anything currently available on the west coast.
Happy to email pictures or a link to the ad by request.
bph999 at gmail.com
1970 Toyota Land Cruiser FJ40 –
9/11 commemorative plate CA Lic. 7DFJ40 (say it fast for the meaning)....
Paint/Body;
• Body taken down to metal/primer (No Rust present), and repainted in Single Stage 1970 Toyota Zephyr Blue – 2008. * there is now a very little surface rust only at the hood/fender joint where the hood rests. That's it and it is surface only.
• Undercarriage – POR 15 and underbody coating applied
Drivetrain;
• 1F motor rebuilt @ 50K miles on odometer. K&N air filter added. Current odometer is 71,437.
• SM420 Trans w/ Advance...
SOLD SOLD SOLD
Bought in 2005 and the build began for 6 years (winters only).
Bought a rolling chassis that was from Arizona. Zero rust.
Aquala aluminum tub,hump and running boards.
Engine compression today is 145 to 150 psi.
New cam and lifters,seals gaskets etc.
Rebuilt carb this spring. New electric fuel pump.
Rebuilt starter,alt,w/p,heater,front axle,rear axle, front and rear brakes.
New clutch,pressure plate,bearings,slave and master.
New rad,new steel gas tank and sender,some new switches,new roll bar,new tires and covers.
New battery, new pertronix electronic ignition with pertronix coil.
Tool kit with jacks,a-frame towing bar, spare parts.
Zero leaks.
Original color was sky blue then green and now tan. I sprayed it...
This is the cheapest running and driving fj40, i priced it to move it so I can get my daily fixed. Will take cash off if you have a nv4500 with t case or a sm465 with a np205
Asking 3500 for mud members.
Located in bend oregon
craigslist add here 1970s fj40
.
So before anything
She runs, she drives, She is street legal, And the title is clear but LOST. I have all the paperwork but no money for the title replacement(switching jobs and between paychecks)
This is a street legal no frills wheeling truck. Anything extra that isnt necessary to running and driving has not been worked on. This is my rez runner, wheeling truck, sand monster, backroads driving, play truck. It is a good straight clean truck from Cali that my family has had for...
