TheGrrrrr
GOLD Star
So I have a Redarc BCDC1225D, Renogy 100ah LiFePO4, a Victron 712 Battery Monitor, A Renogy 1000w Pure Sine Wave Inverter, Blue Sea fuse block, Victron smart low-voltage disconnect, and a variety of inline fuses. All of this will be installed on/around my drawer system in the cabin.
My belief is that I need a 40a inline fuse between the starting battery and the BCDC on a 6awg cord as that is what is already running between the starting battery and the fuse block. Then would run POS+ from the BCDC to the LiPo with another inline 40a on 8awg as that is the output gauge from the BCDC. The ground from the BCDC would run to the fuse block ground which is connected to the chassis earth. The NEG- from the LiPo would run to the Shunt for the battery monitor then from there to another chassis ground point. The POS+ from the LiPo would run to the low voltage disconnect with another 40a inline on 8awg, then on to the fuse block for distribution. I would like to have the inverter downstream from the low voltage disconnect so would I connect the inverter POS+ to the low voltage disconnect, or can I wire the inverter into the fuse block like any other load?
My belief is that I need a 40a inline fuse between the starting battery and the BCDC on a 6awg cord as that is what is already running between the starting battery and the fuse block. Then would run POS+ from the BCDC to the LiPo with another inline 40a on 8awg as that is the output gauge from the BCDC. The ground from the BCDC would run to the fuse block ground which is connected to the chassis earth. The NEG- from the LiPo would run to the Shunt for the battery monitor then from there to another chassis ground point. The POS+ from the LiPo would run to the low voltage disconnect with another 40a inline on 8awg, then on to the fuse block for distribution. I would like to have the inverter downstream from the low voltage disconnect so would I connect the inverter POS+ to the low voltage disconnect, or can I wire the inverter into the fuse block like any other load?
Last edited: