Won't start after backfire with weber carb. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Trollhole

THC
Supporting Vendor
Moderator
Joined
Mar 6, 2005
Threads
1,566
Messages
21,107
Location
Mauldin, SC
Website
forum.ih8mud.com
JUst thought I would put this note in just incase someone else has the same issue. Cranked cold this morning and had it backfire upon cranking then nothing. No matter what I did it still wouldn't crank. Found out after taking the air filter off that it had blown, wedged the choke throttle shut. One pop of the screw driver and it fired right up.

I sea foamed and sprayed the carb down just to get the crud out. RUns much smoother. Cannot wait to put the 3fe in. :D
 
Trollhole said:
JUst thought I would put this note in just incase someone else has the same issue. Cranked cold this morning and had it backfire upon cranking then nothing. No matter what I did it still wouldn't crank. Found out after taking the air filter off that it had blown, wedged the choke throttle shut. One pop of the screw driver and it fired right up.

I sea foamed and sprayed the carb down just to get the crud out. RUns much smoother. Cannot wait to put the 3fe in. :D


same thing happened to me last winter with my weber. :doh:
 

Users who are viewing this thread

Back
Top Bottom