Sir, are you still selling these replacement covers for FJ40/45? I have a 1966 Fj 45 and desperately need one cover. Please let me know the status and price. Thank you, Rick
Wiper Motor Terminal Cover Reproduction (1 Viewer)
- Thread starter andybudge
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
Work in progress. I'll update once completed. Getting closer.
Thank you. I desperately need at least one.
Rick
Hi Andy, any word on the cover for the windshield wiper motor? I desperately need one. Please let me know. Rick
- Thread starter
- #45
I'll have finished samples this weekend
Thanks, please keep me posted.
Rick
HelloKitty65
SILVER Star
Desparate times call for desparate measures!
Flattery, groveling, bribery with the usual enticements ($$$, rare parts, ???)!
By the way, Andy, I used to work in Victoria, and have been to Perth many times when I lived in Singapore (for 27 years).
Please add me to the list. I need 4 covers. Thanks for your work on this!
- Thread starter
- #50
- Thread starter
- #51
Fingers crossed Gents! First sample in the Mold using the new Silicon Rubber. Will report back tomorrow morning.
Hopefully, no bubbles!
Hopefully, no bubbles!
- Thread starter
- #52
Not happy. Will try again.
cruiserkreutz
SILVER Star
- Thread starter
- #56
tahoe40/45
SILVER Star
Thoes look great! Thanks for doing another Cruiser project.
- Thread starter
- #58
This project has taken alot longer than anticipated.
The finished product is not 3d printed, hard form. It is set in a 3d Printed Mold. Made from Silicon Rubber. The Colour matches perfectly.
Once piece is removed from Mold, it requires a ' smoothing ' process, involving Acetone, to remove imperfections on the surface.
It is pliable, like the original and will have the Lock Screw hole drilled, as per the original.
As you can gather, a time consuming process.
So, they will be $125 for a Pair.
Contact me by DM if interested?
The finished product is not 3d printed, hard form. It is set in a 3d Printed Mold. Made from Silicon Rubber. The Colour matches perfectly.
Once piece is removed from Mold, it requires a ' smoothing ' process, involving Acetone, to remove imperfections on the surface.
It is pliable, like the original and will have the Lock Screw hole drilled, as per the original.
As you can gather, a time consuming process.
So, they will be $125 for a Pair.
Contact me by DM if interested?
Excellent! 1 set for me please.
- Thread starter
- #60
I'm trying again to get these reproduced! Was close last time ( 2021) but due to health issues of the individual making them for me, it didn't eventuate.
I have another contact and it's at the 'see if it is possible?' stage at present.
CAD drawings submitted.
I'll keep you posted.
I have another contact and it's at the 'see if it is possible?' stage at present.
CAD drawings submitted.
I'll keep you posted.
