hdjtachtig

N.b. using Haast Stayfast Tan/Tan. Clear Vinyl is thicker. It's what is used on Flybridge Canopies on Boats. High UV resistance, doesn't pucker , prism or yellow. Fittings are genuine oem or as close to original as I have been able to source over...

It seems that the burnt down FJ45RV has been resurected

Me again, after almost 9 years!. I finished the restoration of the T10. Took me more than expected, but I had others personal projects to manage, but now I can post some pictures and "a long" 12 min video" with many photos of the whole process...

We were recently added some new and beautiful early 40 switches to site. Map light switch Headlight switch The little map light is a 65 to pre-67ish variety with the screw terminals on the rear. The later map/Vader lights moved to bullet...

Couldn’t agree more. In the beginning Matt found a competent locksmith to deal with the rekeying. But when that resource went away, Mat stepped up to the challenge, increased his skillset to learn something I consider to be pretty esoteric, and...

Denso clamshell heater disassembly for inspection and mapping a part for reproduction. Such a beautiful piece! Talk about serviceability, came apart super easy.

Good progress the past few months (relatively speaking) on the 28. I’m going to hold off posting any photos until more of it is reassembled as a lot of the panels have to be removed to be repaired. I did come across this this morning on...

Bushings and Koito red body reflectors have been restocked on the website. :) Get tighter shifter feel and more visibility for your old rig! The parts are laying against an old SST manual that I brought back from the Netherlands. It will be...

Well back at the taillight on ps of my 40 :meh: Thought that the taillight had a bulb out or possibly rotted away like the last taiwanese… replaced in 14’ then again with another Taiwanese in 20’ …but… it wasn’t the bulb OR the taillight...

36144-60010 Sold the last one out of our bin today and killed the part number in our system. I think these have been discontinued for 5+ years, we last ordered a few a decade ago. Fortunately they are still available in the t-case gasket kit...

Side face straightened.

Full Body detail

Went to visit Manuel, here are a few details of his build: He got an old Jeep knob for his Choke.

Well it's been a long time. I have no excuses for letting my project sit. BUT I have made some headway recently. Working on getting the rear sill permanently installed, lead to a test fit and then I decided to mount the tailgate just to make sure...

Major milestone 😎. Now you will get even more eager & impatient 😀.

3 forward and 1 reverse?😂

Yes !!! :cool:

First Drive ( test) in 9 yrs!

I might be able to help with the pedal. My forklift parts supplier says they are available 3-4 weeks. Not the bracket and the bezel unfortunately.

FJ25 didn’t have a high-low transfer case. FJ40 did so actually has choice of 6 gears.

Yes that must be the uber rare factory flipped bezel😂.

Bonnet ' bling' painted, fitted and Panels aligned.

Changed Alloy fittings to Brass to sort out an Air leak issue. Problem solved.

Proffitt's Resurrection Landcruisers has some 3D printed wiper covers. Plastic instead of rubber, but work well.