What do you use for polishing headlights? I need to do this.
What have you done to your 200 Series this week? (12 Viewers)
- Thread starter MScruiser
- Start date
-
- Tags
- 200 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
3M kit
You’re putting some miles on it! Good trips?
What was done as far as chassis and driveline lube? Any info you can share regarding products would be helpful too.
I did the same weekend as the last oil change.
I’ll replace them sooner or later. They are just done.
I’ve been able to find other places to spend $700 plus recently
We did have a big trip back early September. 4000+ of those miles. Great trip to Montana. Definitely needed about 10 more days.
I just lube all the grease fittings. Mostly the driveline. I use whatever grease we have in our grease gun, pretty sure it’s just normal ole chassis grease we get by the case.
bloc
SILVER Star
I polished a bunch of times then ended up waiting for one of the big sales to buy new lights. No regrets.
Plan is to polish my old ones again then clear them and sell as used.. I figure I’ll get a few hundred out of them.
The hard part will be holding the lights still while polishing when no longer attached to the vehicle..
Actually the first time I polished mine they were removed.
I used a big 7” buffer and just held the lights between my legs on a piece of old carpet.
Nature’s vise
sanding/polishing headlights is useless in my experience--only lasts a few months. I've heard that clear coat makes the fix more long-term, but my wife has a serious aversion to any sort of spray paint product. Is there any sort of vinyl wrap product that would suit the same purpose?
Interesting. We have a TSX Wagon in the fleet and a 03 RX300. I polished them 20 months ago, and did a laquer clearcoat, and they are still jewel like clear and new looking.
Well I'm guessing that's the clearcoat. I did the restore and polish without clearcoat and they looked great, but quickly went to s*** again.
What I'm wondering is if there is a vinyl-like product I can use as a last step instead of clearcoat that would be just as (or nearly as) effective? Spray paint products cause marital strife in my household.
What I'm wondering is if there is a vinyl-like product I can use as a last step instead of clearcoat that would be just as (or nearly as) effective? Spray paint products cause marital strife in my household.
I can't speak to 3M vinyl if that will protect it.
That said, the clearcoat I have successfully applied, is not spray, you apply it by hand, like nail polish.
Hmm, that might work. Do you know what product it was?
Optimum Opti-Lens Permanent Headlight Coating 10 cc
Optimum Opti-Lens Permanent Headlight Coating - Free Bonus! - Includes poly-foam applicator and 16 x 16 inch Gold Plush microfiber towel! Permanent headlight coating protects against UV-induced yellowing and fading Optimum Opti-Lens Headlight ...
www.autogeek.net
That is what I used. I am sure there are many others out there.
I’ve used 50/50 mineral spirits and polyurethane from the hardware store with great results. It’s easy to redo if it gets pitted and needs to be re-done.
Sinister
SILVER Star
I have done something bad……….sold her.
reddog90
SILVER Star
What big sale are you talking about? I need new headlights. I don't want to polish again.
bloc
SILVER Star
See the thread about the 20% in August. It wasn’t at Serra but a number of dealers jump in on these sales. Between their usual discount and the additional 20% it ends up being something like 40% off of retail depending on the part.
Sinister
SILVER Star
Sold her for this…..and wow, what a difference.I have done something bad……….sold her.
Get that thing undercoated
