What have you done to your 200 Series this week? (33 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

May not be interesting, but I was inspired by many of the stateside cruisers in the forum. Replaced the chromed mirror caps that came stock on my 2011 VX Diesel to color-keyed mirror caps. Kept the chromed caps for future use too if I wanna go back to stock.

Original Chrome Mirror Caps
275056798_5054854004571108_1160860410793713076_n.jpg


Color-keyed Mirror Caps
275012574_5054853941237781_920548757744707024_n.jpg
 
After a long wait I picked up Dissent Offroad step sliders for my 2021 HE at their shop a few weeks ago. I think they look great! I've been working on the install for the last 3 weekends which has been an ordeal solely due to my difficulty getting rivnuts installed so they wouldn't spin in the holes. I stripped or broke two installation tools. I finally used some plusnuts in a few locations got it done. Now my wife can get in easier. When I wear these tires out, I'll put in front spacers and bigger tires.

Chris


View attachment 2938891View attachment 2938892View attachment 2938893
I enjoy my Dissent sliders
 
Painted(earlier) and installed Stage 1 of Bud Built Skids.
Finally! A garage that looks like mine, instead of the vast, spotless, fully-outfitted spaces frequently seen. ;)
 
The process took a lot longer than a week, but in the past 2 months or so I had the following done.

Ironman 4x4 Foamcell Stage 2, 2" lift
SpiderTrax 1.25" spacers all around, this set the wheels up with a nice fitment with no poke.
BFG KO2 in 275/70/18 on a new set of
Tundra 5 spoke wheels
new OEM CVs



View attachment 2940157

View attachment 2940158

So far I'm pretty happy with the lift. The ride itself is much stiffer, almost like a new car, however it also takes bumps at a stiffer and gentler way than some of the new cars I've driven so far. Again this is comparing it to a set of stock shocks with 200K on them.

With the set up I really could go taller on the tires, but I decided to stick with this set up. No rubbing/contact with this set up. I did have to mould the fender liners with a little bit of heat and a 2x4.
Looks rad. Those shocks will break in a bit, too.
 
Saying hello to the Forum. I'm a long time Jeep owner who made the switch and joined the 200 series ownership community this week. I have more than 20 years of experience with Wranglers, but as I got older, softer and had kids my needs in life changed and I bought a new-ish 200. It came with a bunch of upgrades from the prior owner -ARB lift and bumpers, HID lights, winch, roof rack, LRA expanded tank. I confess, the ride will be a New England family toter for camping trips, ski trips and unstoppable sled for when I want to be sure to make first chair on fresh powder days with no excuses for not getting there. It won't do much rock crawling, but true to the forum it will have to conquer a lot of New England mud in March and April.

My question is - what am I missing? I have a hi-lift jack laying around that I'll get the mount for. I'll swap the stock winch hook for the Factor 55 one. I can't see me ever needing a snorkel. I'll add a rear tow point for the hitch. Beyond that, it's probably over-built for my needs, but it will be fun to see how hard I can push her. Looking forward to joining this community.

Front quarter.jpg


right side.jpg


Rear quarter.jpg
 
Saying hello to the Forum. I'm a long time Jeep owner who made the switch and joined the 200 series ownership community this week. I have more than 20 years of experience with Wranglers, but as I got older, softer and had kids my needs in life changed and I bought a new-ish 200. It came with a bunch of upgrades from the prior owner -ARB lift and bumpers, HID lights, winch, roof rack, LRA expanded tank. I confess, the ride will be a New England family toter for camping trips, ski trips and unstoppable sled for when I want to be sure to make first chair on fresh powder days with no excuses for not getting there. It won't do much rock crawling, but true to the forum it will have to conquer a lot of New England mud in March and April.

My question is - what am I missing? I have a hi-lift jack laying around that I'll get the mount for. I'll swap the stock winch hook for the Factor 55 one. I can't see me ever needing a snorkel. I'll add a rear tow point for the hitch. Beyond that, it's probably over-built for my needs, but it will be fun to see how hard I can push her. Looking forward to joining this community.

View attachment 2940882

View attachment 2940883

View attachment 2940884
Looks like it’s not missing anything. Just enjoy it!
 
Saying hello to the Forum. I'm a long time Jeep owner who made the switch and joined the 200 series ownership community this week. I have more than 20 years of experience with Wranglers, but as I got older, softer and had kids my needs in life changed and I bought a new-ish 200. It came with a bunch of upgrades from the prior owner -ARB lift and bumpers, HID lights, winch, roof rack, LRA expanded tank. I confess, the ride will be a New England family toter for camping trips, ski trips and unstoppable sled for when I want to be sure to make first chair on fresh powder days with no excuses for not getting there. It won't do much rock crawling, but true to the forum it will have to conquer a lot of New England mud in March and April.

My question is - what am I missing? I have a hi-lift jack laying around that I'll get the mount for. I'll swap the stock winch hook for the Factor 55 one. I can't see me ever needing a snorkel. I'll add a rear tow point for the hitch. Beyond that, it's probably over-built for my needs, but it will be fun to see how hard I can push her. Looking forward to joining this community.

View attachment 2940882

View attachment 2940883

View attachment 2940884
Looks and sounds like you have the machine you need. Enjoy it and welcome to the club.
 
Saying hello to the Forum. I'm a long time Jeep owner who made the switch and joined the 200 series ownership community this week. I have more than 20 years of experience with Wranglers, but as I got older, softer and had kids my needs in life changed and I bought a new-ish 200. It came with a bunch of upgrades from the prior owner -ARB lift and bumpers, HID lights, winch, roof rack, LRA expanded tank. I confess, the ride will be a New England family toter for camping trips, ski trips and unstoppable sled for when I want to be sure to make first chair on fresh powder days with no excuses for not getting there. It won't do much rock crawling, but true to the forum it will have to conquer a lot of New England mud in March and April.

My question is - what am I missing? I have a hi-lift jack laying around that I'll get the mount for. I'll swap the stock winch hook for the Factor 55 one. I can't see me ever needing a snorkel. I'll add a rear tow point for the hitch. Beyond that, it's probably over-built for my needs, but it will be fun to see how hard I can push her. Looking forward to joining this community.

View attachment 2940882

View attachment 2940883

View attachment 2940884
Beautiful 200. My only suggestion would be to black out the chrome trim on the doors to complement the otherwise all black aesthetic.
 
Saying hello to the Forum. I'm a long time Jeep owner who made the switch and joined the 200 series ownership community this week. I have more than 20 years of experience with Wranglers, but as I got older, softer and had kids my needs in life changed and I bought a new-ish 200. It came with a bunch of upgrades from the prior owner -ARB lift and bumpers, HID lights, winch, roof rack, LRA expanded tank. I confess, the ride will be a New England family toter for camping trips, ski trips and unstoppable sled for when I want to be sure to make first chair on fresh powder days with no excuses for not getting there. It won't do much rock crawling, but true to the forum it will have to conquer a lot of New England mud in March and April.

My question is - what am I missing? I have a hi-lift jack laying around that I'll get the mount for. I'll swap the stock winch hook for the Factor 55 one. I can't see me ever needing a snorkel. I'll add a rear tow point for the hitch. Beyond that, it's probably over-built for my needs, but it will be fun to see how hard I can push her. Looking forward to joining this community.

View attachment 2940882

View attachment 2940883

View attachment 2940884

Only thing you'll need is gas my man, great looking truck. Enjoy and welcome from a fellow newbie.
 
Saying hello to the Forum. I'm a long time Jeep owner who made the switch and joined the 200 series ownership community this week. I have more than 20 years of experience with Wranglers, but as I got older, softer and had kids my needs in life changed and I bought a new-ish 200. It came with a bunch of upgrades from the prior owner -ARB lift and bumpers, HID lights, winch, roof rack, LRA expanded tank. I confess, the ride will be a New England family toter for camping trips, ski trips and unstoppable sled for when I want to be sure to make first chair on fresh powder days with no excuses for not getting there. It won't do much rock crawling, but true to the forum it will have to conquer a lot of New England mud in March and April.

My question is - what am I missing? I have a hi-lift jack laying around that I'll get the mount for. I'll swap the stock winch hook for the Factor 55 one. I can't see me ever needing a snorkel. I'll add a rear tow point for the hitch. Beyond that, it's probably over-built for my needs, but it will be fun to see how hard I can push her. Looking forward to joining this community.

View attachment 2940882

View attachment 2940883

View attachment 2940884
Beauty, Clark! If it were me, I'd downsize those wheels and put a little more rubber in the equation. Hard to tell but they look like 20's? Might just be the angle. Regardless, a lot of us run 17's or thereabouts and enjoy the ride of bigger sidewall.
 
Installed the slide out table for my Air Down Gear Up system. Immediately used it to enjoy an afternoon coffee. Nice addition!
1646357948897.png
 
Just bought this 2014 Series 200 last month with 94k miles. Installed ARB bumper with 7" Pro Comp lights, powder coated the wheels, removed running boards, and added 1 inch leveling kit. Can't see in the picture, but painstakingly installed black stickers on top of chrome lettering on the back. Chose to stick with the existing tires as I'll be driving it on the highway quite a bit. What else should I think about doing to it? Not loving the chrome on the side but haven't read about a good solution (have previously vinyl wrapped chrome on other vehicles).

InkedLandYacht1_LI.jpg
 
Just bought this 2014 Series 200 last month with 94k miles. Installed ARB bumper with 7" Pro Comp lights, powder coated the wheels, removed running boards, and added 1 inch leveling kit. Can't see in the picture, but painstakingly installed black stickers on top of chrome lettering on the back. Chose to stick with the existing tires as I'll be driving it on the highway quite a bit. What else should I think about doing to it? Not loving the chrome on the side but haven't read about a good solution (have previously vinyl wrapped chrome on other vehicles).

View attachment 2942508
You can hit that chrome with Plasti Dip.
 
What else should I think about doing to it?

Congrats on the cruiser and welcome! I also have a 2014 and love it.

Before anyone can help with advice, you need to define what you want to use it for.

If you just want to drive around on good roads and not total your rig via a cattle strike, you are done.

If you plan to do some overlanding and camping, you probably need to look at tires, suspension, storage, etc... Do you need the rear seat (seating for more than 5)? Do you care about a few MPG given that 200's get bad fuel economy already and gas prices are forecast to get worse? It is a slippery slope to look at pictures of all these epic LC's on MUD and decide you want something without knowing if you actually NEED it. For example, your ARB bumper could accept a nice $1k winch, but would you ever use it?

Help us help you... ;)
 
I had some time today so got some things done on the 200. I got my Escape Gear seat covers on the front and back seats.

FrontSeats.jpg



RearSeats.jpg



I also installed a handle on the rear of my roof rack to make it easier to reach my Maxtrax.

Hand1.jpg



Hand2.jpg
 
I had some time today so got some things done on the 200. I got my Escape Gear seat covers on the front and back seats.

View attachment 2943276


View attachment 2943277


I also installed a handle on the rear of my roof rack to make it easier to reach my Maxtrax.

View attachment 2943279


View attachment 2943280
The more I see these seat covers the more they grow on me, I’m actually starting to dig the utilitarian look. I feel like I just need to spring for them before I give my kids a real go at the destruction they can dole out at any moment without provocation or warning.
 

Users who are viewing this thread

Back
Top Bottom