DesmoPilot
SILVER Star
Ceramic coated and installed Apex valves on the wheels before getting tires this week.
What have you done to your 200 Series this week? (13 Viewers)
- Thread starter MScruiser
- Start date
-
- Tags
- 200 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Are these the stander or XL Apex? Work with TPMS?
New braky brakes on the front.
One of the pistons on the front right was kaput and unfortunately you need to replace calipers in a pair.
I also had a new OEM battery installed and the alternator replaced (reactively, it broke down).
Oh, I convinced my wife that we need a roof rack on the condition that I lose 10 kg so... Which I guess it's a good deal ?!?
One of the pistons on the front right was kaput and unfortunately you need to replace calipers in a pair.
I also had a new OEM battery installed and the alternator replaced (reactively, it broke down).
Oh, I convinced my wife that we need a roof rack on the condition that I lose 10 kg so... Which I guess it's a good deal ?!?
DesmoPilot
SILVER Star
I went with Standard length for this wheel. The XL would have stuck out beyond the rim face. These are compatible with a couple of TPMS sensors. However, I am using the stock ones with a wheel strap. I ordered the tires this morning when I was at Discount getting a nail repair on Tesla. Tires should arrive Friday. I will mount them up Monday or Tuesday next week.
I don’t think our tpms will work. I could be wrong tho.
APEX Rapid Precision Valve TPMS Fitment
Style of TMPS mount that is compatible with APEX deflator: VS-950 VS-650 Toyota and related brands use a one piece TPMS/tire valve & will require the use of the TPMS Adapter Kit.
www.apexdesignsusa.com
DesmoPilot
SILVER Star
I am not mounting them directly to the Apex valve. I am mounting the factory TPMS on a wheel strap.I don’t think our tpms will work. I could be wrong tho.
APEX Rapid Precision Valve TPMS Fitment
Style of TMPS mount that is compatible with APEX deflator: VS-950 VS-650 Toyota and related brands use a one piece TPMS/tire valve & will require the use of the TPMS Adapter Kit.
Oooo a wheel strap? Link?
DesmoPilot
SILVER Star
Sweet so this just goes around the whole wheel and clamps down? That’s neat. I will be ordering all this soon.
I'm a little ahead of you, and stuck. I pulled the seats, got the HE mat, but I can't figure out a clean way to tie down a Ruff Land kennel -- I don't want straps going diagonally across to the other side of the cargo area, cutting off that storage. But I haven't figured out how to go straight down from the side of the kennel -- it's past the near third row bracket, but not over to the far one . . . . what kind of tie downs are you planning? Thanks
I’m not 100% sure until I get the kennel tomorrow. But, it looks like I’ll need to slice a couple areas in the rubber mat for the hooks to fit through. Picking up my new pooch on Wednesday, so hopefully I have with figured out by then
I did this full kit.... which comes with 1 set of Pro Forge Upper Control Arms. the kit is adjustable on the lift - did about 1.5" out the door with a slight height differential in back for "load" - feels like after our trip to colorado this past week and putting on about 2K miles since I had it done that its settled a little to close to about an inch maybe more as the "lift"
2" Foam Cell Pro Suspension Lift Kit for Toyota Land Cruiser 200 Serie
Designed for and used by the US Military, Foam Cell Pro suspension systems require less maintenance than other performance suspensions and are rebuildable by design. The Foam Cell Pro suspension lift kits are the strongest and most reliable and will serve you for a lifetime. Built for...
ironman4x4america.com
And I'm just behind you, my 2021 Mag Gray/Terra base is "built and in transit to the port" need to strap down my Ruff Land Kennel as well, will be watching for your solutions.
Got her some new headgear.
Ordered my highland bronze from Prismatic for the wheels.
afgman786
SILVER Star
That's slick placement!
Thanks.
I really wanted to put it between the MTS knob and the ECT PWR/2nd Start button, but despite the blank space there's actually a wiring harness behind it, so this will have to do
Markuson
SILVER Star
Hmmm. Gives me an idea as
I would love to move my ECT/Power switch. It sits flat next to the shifter and always get inadvertwntly changed...
Yeah, it's not actually possible, sadly. I should've taken a photo but the entire area from the MTS knob all the way to the seat heater is one giant plastic piece with wiring inside it.
