What have you done to your 200 Series this week? (17 Viewers)

[nwfl4runner]

Can you confirm that you've done this? Slee told me that the LC rocker panels had to be done first before putting the sliders on. I have the sliders for the 2013 LX570 but am waiting on the LC rocker panels to arrive before installing them. Thanks!

Yup you’re good (it’s tight). There are 8 rubber grommet plugs underneath that need to be removed and reinstalled so don’t forget those (I did the first time).

The only difficulty will be ensuring the sliders are level and gapped appropriately, but my eyeball squint level is pretty solid.

 

[AZCRSR]

Disregard my post.

 

[Jmsnirsh]

Intere

Installed rearview 12" mirror front/rear dash cam. It has GPS with speed n compass, clock/date as wellView attachment 2221130


View attachment 2221129

Intersted in learning more. What is the model, where did you buy and how was the install? Thank you in advance!

 

[RiDE]

Found some time to work on the rig finally. REEF drawer, HAM and Weboost. Still have to figure out how I want to finish the surface of the Reef but liking them so far. Waiting on wing kit and anchor kit for it.

 

[reddog90]

Put on a set of BFG AT KO2s in size 285/65R18 today. Headed west to Big Bend NP tomorrow evening to see how they handle the harsh desert terrain.

View attachment 2228962

View attachment 2228965

Let us know how it goes! Great time of year to visit.

 

[Willy beamin]

Later, old evap code throwing system. I Installed all mew parts yesterday with some helpful how to info from @Atwalz - thanks man

 

[empty80]

Later, old evap code throwing system. I Installed all mew parts yesterday with some helpful how to info from @Atwalz - thanks man

View attachment 2230910

I sure do hate that feeling!

 

[kms254]

Just a normal oil change... but this extractor sure makes it less messy..

 

[adashoe]

List of items:
1. Tough Dog suspension install
2. Long Ranger fuel tank install
3. Safari Snorkel install
4. Install ARB Twin Compressor
5. Install Front Runner Roof Rack and tables
6. Fabricate front skid plate
7. Fabricate winch wount
8. Install warn 12S Zeon
9. Install Switch-pros 9100 and wire up
10. swap out LC steelies for EvoCorse DakarZeros
11. Install Blue sea Systems switch panel and charging panel
12. Install Rago Fab rear window panel (powdercoat and paint to match)
13. Install Lazer Lamps front driving lights
14. Buy lots of beer

Fun week ahead

 

[RET2]

Later, old evap code throwing system. I Installed all mew parts yesterday with some helpful how to info from @Atwalz - thanks man

View attachment 2230910

View attachment 2230914

View attachment 2230915

This doesn't look like fun

 

[Willy beamin]

I sure do hate that feeling!

Whats that?

 

[Willy beamin]

This doesn't look like fun

Wasnt bad. Took plenty of pics prior to taking the old off to help me remember what went where. Had that bolt not broken would have taken less time. Took me about an hour+

 

[swiss200]

Reversed into the garage door. I'm in a world of shame now o_0

 

[empty80]

Whats that?

Snapping bolts. I did it last weekend.

 

[boozewz]

Got the Mann Provent oil catch can installed.

 

[Tngo23]

Intere

Intersted in learning more. What is the model, where did you buy and how was the install? Thank you in advance!

I posted a link from Amazon some where on same thread
I wasn’t sure it would fit my needs in clarity for both front/rear but after install
I am hapoy with results
As with the install, pretty straight forward if you are handy and hv the right tools

run all wires n tuck un Headliner for front n back Cam however the rear cam will take the most time as I wanted a clean job.

 

[NateK]

2. Long Ranger fuel tank install

View attachment 2231709

Is this the 33gal tank?
Any chance thou could take a picture from the rear and side at bumper level showing how low it hangs down?

 

[jmw101]

Reversed into the garage door. I'm in a world of shame now o_0View attachment 2231764

No worries. Gives the place some character !

 

[desmocruiser]

 

[desmocruiser]