What have you done to your 200 Series this week? (46 Viewers)

[mark71]

Just added a couple of little things:
a new set of Nitto Exo Grappers 285/70R-18 (~34")
4.88 Yukon gears
SPC UCAs
Front and Rear ARB Air Lockers
Twin ARB Compressor
ARB Diff Breather
Finally finished my Switch Pros install
and added a pair of Front Runner LED cubes to the back of the roof rack.

You know the usual...

Now, all have to do is complete the 500 mile gear break in before I leave for Breckenridge on Friday

And I took to the scales to see how much all of this weighs. The LC was completely empty, no passengers witha full tank of gas

Is it just me or does that weight seem too light?

 

[hamad974]

Just added a couple of little things:
a new set of Nitto Exo Grappers 285/70R-18 (~34")
4.88 Yukon gears
SPC UCAs
Front and Rear ARB Air Lockers
Twin ARB Compressor
ARB Diff Breather
Finally finished my Switch Pros install
and added a pair of Front Runner LED cubes to the back of the roof rack.

You know the usual...

Now, all have to do is complete the 500 mile gear break in before I leave for Breckenridge on Friday

And I took to the scales to see how much all of this weighs. The LC was completely empty, no passengers witha full tank of gas

Hey
Where can i buy the same ARB bumper and side bar flares that are connected to the rock sliders. Any links ?

Thanks

 

[TRD Burglar]

Is it just me or does that weight seem too light?

I was expecting something closer to 7000#, but I'll take it.

Hey
Where can i buy the same ARB bumper and side bar flares that are connected to the rock sliders. Any links ?

Thanks

I bought mine from TRDparts4U, but I imagine you could get them from any ARB dealer.

 

[hamad974]

I was expecting something closer to 7000#, but I'll take it.



I bought mine from TRDparts4U, but I imagine you could get them from any ARB dealer.

for some reason I can't find it.. can you post the link or the part number to the side fender metal that connects to the rock slider from the Arb bumper

 

[milkyxj]

for some reason I can't find it.. can you post the link or the part number to the side fender metal that connects to the rock slider from the Arb bumper

Just a warning, the ARB are "steps" not full on sliders. They can take a hit or 2, but the Slee sliders are much heavier duty. That said, I have the ARB steps and am very happy with them. Part: ARB SIDE RAILS TOYOTA LANDCRUISER 200 SERIES 2007-11 (4415010)

You have to have the ARB side steps as well for the side rails to fit. Overall very sturdy, again I'm happy with mine. You have to drill the ARB front bumper to install them as well.

 

[paul r]

Hey
Where can i buy the same ARB bumper and side bar flares that are connected to the rock sliders. Any links ?

Thanks

Kurt (@cruiseroutfit) has always taken good care of me for anything ARB related. Call in and talk to Bryce (or Kurt when he gets back stateside).

Cruiser Outfitters

 

[NLScooby]

After what is likely a record breaking amount of time to install a lift, I finally completed my Tundra front end conversion. Bilstein 6112's up front and Fox 2.0's in the rear with OME 2722's. Waiting to let it settle a bit then will take it in for alignment.

 

[sickspeed]

After what is likely a record breaking amount of time to install a lift, I finally completed my Tundra front end conversion. Bilstein 6112's up front and Fox 2.0's in the rear with OME 2722's. Waiting to let it settle a bit then will take it in for alignment.View attachment 1502933

Awesome! How is the ride quality and did you need any additional parts to do the install?

 

[sPaulp]

side pic and the super cool switch panel SLEE created...... this is exactly why I spend so much with these guys... they're constanting solving the issues with great products.... when I arrived the 3 ARb switches were a junk show as they ddn't fit and hit each other....

problem solved.

@slee now if only there was a really good front bumper....... no, really......


EView attachment 1501859 View attachment 1501860

Amazing, just simply amazing. E, I have a man crush on you lol

 

[kreiten]

Oil change, filters all changed and a new pair of shoes on the rig for the trip!

 

[Markuson]

Oil change, filters all changed and a new pair of shoes on the rig for the trip!
View attachment 1503469 View attachment 1503470

Rockin' that fast 50mm at about 1.4 again?

You must like those muds, cuz that's at least 2 sets in a row, right?

 

[TonyP]

That highway hum from the M/Ts will come in handy with the new kid

 

[Markuson]

That highway hum from the M/Ts will come in handy with the new kid

Ya, although I'd wager the identical-but-worn-down MT's he took off made even more hum...

 

[ethernectar]

Jumping on the bandwagon.

Saw this mod on a Tacoma at a recent Overland Bound meet...

0717_XPLORR_RAMmounts-0729 by Matt Frederick, on Flickr

6MM bolt, through RAM Mount ball head (Motorcycle piece)

0717_XPLORR_RAMmounts-0730 by Matt Frederick, on Flickr

Versatile setup. Have a couple magnetic mounts for radios/etc as well as a mount for the Garmin Montana when we do Land Ops trips. The iPad stays mounted on the center console. Will see how it works/evolves.

 

[Willy beamin]

Hum-dinger nice shoes....did you replace with the same size as before?

 

[kreiten]

Rockin' that fast 50mm at about 1.4 again?

You must like those muds, cuz that's at least 2 sets in a row, right?

Good eye buddy, it's the 50 F1.4 again but up at 2.8 this time! I love the fixed glass, I got 2 of the 50's and a 28 I'll be bringing on the trip! Love these tires, yep this is my second set! I realized that I set the tire dealeo under maintenance for 30k and was 2800 short. So just under 30k miles on them and they are at about 50% maybe just a bit less. I didn't want to roll into the trip with worn out shoes, so I grabbed a new pair!

 

[kreiten]

Hum-dinger nice shoes....did you replace with the same size as before?

Yah, still in the 34 crew for now

 

[kreiten]

That highway hum from the M/Ts will come in handy with the new kid

Hah so true, I've seen it put adults right out also! Check it out Tony, matching spare now

 

[kreiten]

meanwhile Zoey AKA Zotron is out like a light in the living room!

 

[Markuson]

meanwhile Zoey AKA Zotron is out like a light in the living room!
View attachment 1503545

Schneiky she's cuute!

Hey... If you don't need any more, maybe make an extra for us? You make good'ns..