What have you done to your 100 Series this week? (20 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
bluecruiser
SILVER Star
Nicely done. Took mine out for a shakedown run today. Front locker finally works again...getting the ARB repaired sucked....and without a doubt, the new lower control arms up front soak up so much more than the originals ones were doing at 218k miles.
- Thread starter
- #843
HopefulLy stopped the cv leaks with a slee diff drop kit ( great bolt on product with good directions for us wrenching impaired guys).
Put my truck back to stock tonight.
Removed:
Sliders
Dual battery system
Aux fuxeboxes, etc.
CB radio and antenna
LabRak roof rack
Cabin air filters
HID system
Put stock parts back on:
Roof rack
Tried to put runningboards back on but couldn't get them lined up right. Threw them in the back instead.
Still to go, remove:
LED external and internal lights
OME 2.5" lift
Slee Diff drop
Slee Blueberry Bumper
295/75/16 Nitto Terra Grapplers
Floor mats and husky liners
K&N Filter
Spark Plugs
Brand new starter if I get really ambitious.
Removed:
Sliders
Dual battery system
Aux fuxeboxes, etc.
CB radio and antenna
LabRak roof rack
Cabin air filters
HID system
Put stock parts back on:
Roof rack
Tried to put runningboards back on but couldn't get them lined up right. Threw them in the back instead.
Still to go, remove:
LED external and internal lights
OME 2.5" lift
Slee Diff drop
Slee Blueberry Bumper
295/75/16 Nitto Terra Grapplers
Floor mats and husky liners
K&N Filter
Spark Plugs
Brand new starter if I get really ambitious.
new goodies for recovery
Rec'd some goodies this weekend in the mail.. masterpull 1 inch x 30 feet kinetic recovery rope. 3/8's x 85 feet synthetic winch line and 2 universal recovery brackets.
the recovery brackets came with nice grade 8 hardware, however, were too short to accommodte my ARB bumber winch requires longer bolt length to get through the bumper and hit the frame threads. Luckily ARB included longer hardware for the original shipping tie downs and was able to use them..
The winch line wasn't much of a hassle. Pulled off the cable off the drum and rewound the new syn line. waaaaaay easier to handle and wrap. i always fight with the steel winch lines to get it to lie properly.. this was easy peasy.
Just waiting the factor 55 pro link that is on order.. picked up 7 of them for our local yota wheeling club.
Rec'd some goodies this weekend in the mail.. masterpull 1 inch x 30 feet kinetic recovery rope. 3/8's x 85 feet synthetic winch line and 2 universal recovery brackets.
the recovery brackets came with nice grade 8 hardware, however, were too short to accommodte my ARB bumber winch requires longer bolt length to get through the bumper and hit the frame threads. Luckily ARB included longer hardware for the original shipping tie downs and was able to use them..
The winch line wasn't much of a hassle. Pulled off the cable off the drum and rewound the new syn line. waaaaaay easier to handle and wrap. i always fight with the steel winch lines to get it to lie properly.. this was easy peasy.
Just waiting the factor 55 pro link that is on order.. picked up 7 of them for our local yota wheeling club.
**Put on my Mammoth Sticker on the rear window 
Forgot to snap a photo
**Plasti-Dipped the front bumper, hoop and grill/emblem
Ran out of paint, otherwise I would have re-done the trim. It's long overdue for another coat
Forgot to snap a photo**Plasti-Dipped the front bumper, hoop and grill/emblem
Ran out of paint, otherwise I would have re-done the trim. It's long overdue for another coat
I finally had time to get my 1-inch body lift installed, changed the oil, replaced my broken front swaybar links and greased the driveshafts.
Also test fitted the 35s and took a test drive through the woods. It was a good weekend!
Sent from my Thunderbonner using IH8MUD
Also test fitted the 35s and took a test drive through the woods. It was a good weekend!
Sent from my Thunderbonner using IH8MUD
bluecruiser
SILVER Star
The body lift is the new "remove your running boards".looks good!
cboyd
GOLD Star
Removed the lower console and fixed the following:
- Broken Cup Holder Door
- Sticking 2nd/PWR Switch set
- Removed the Wood Trim
- Cleaned the console part and removed 14 years of gunk / spilled coffee
Other:
-removed wood trim from the door panels...
- RobRed's Contant-On Power Accy Mod
Still Can't figure why the Cigar Lighter won't work. Good fuse, but not getting power.
- Broken Cup Holder Door
- Sticking 2nd/PWR Switch set
- Removed the Wood Trim
- Cleaned the console part and removed 14 years of gunk / spilled coffee
Other:
-removed wood trim from the door panels...
- RobRed's Contant-On Power Accy Mod
Still Can't figure why the Cigar Lighter won't work. Good fuse, but not getting power.
bluecruiser said:
It's not easy keeping up with The Joneses around here. First it was "remove the running boards", then "body lift", now it's gonna be "Nice truck, but that IFS, ugh.....you gotta swap that"
beefed up my drawer system and added a locking feature on my hidden compartment....I'll be damned if anyone is gonna steal my s***e!
Where did you get that roof rack? That'll be my next addition. Trying to do some research. I want mine to look a lot like yours.
Balto1223 said:
I got it online about 5-6 years ago. It used to be on my FJ-62, and I moved it over to the 100.
I'm out of town for work this week, but I have the receipt in the garage at home. I'll look this weekend.
Sent from my Thunderbonner using IH8MUD
I completed my metal drawers this weekend. It was much more work than I ever imagined. Looking back, I would probably just purchase the outback drawers. Total cost was around $850 which includes all of the metal fabrication outsourced.
I still need to install the tie down tracks this weekend.
I still need to install the tie down tracks this weekend.
I just installed an ARB Pilbara rooftop tent and ARB 6 foot awning. I'm impressed with both so far. The tent in particular is super well constructed.
I can't wait for spring time camping and music festivals this summer.
I can't wait for spring time camping and music festivals this summer.
Last edited:
Before:
After (vinyl wrap):
More pics to come (too tired now...)
After (vinyl wrap):
More pics to come (too tired now...)
- Thread starter
- #860
Dragon....that is.....awesome!
Pm sent
My oil change doesn't compare!
Pm sent
My oil change doesn't compare!
