What have you done to your 100 Series this week? (64 Viewers)

[poetdereves]

I replaced all four of my O2 sensors to solve a P0420 code. Unfortunately, light came back on after 15 miles.
I also go in there to find where an oil leak was coming from. A lot of weeping around the passenger side valve cover gasket. Most of the bolts weren't even finger tight.
Day by day getting my new 100 series back to baseline with maintenance before I make any modifications.

 

[Pucker5]

Kinda fwp irritated, had to order new wipers for my 2003. Last time i ordered them i found Nwb local for like 30$ for the set. This time I had to buy Toyotas for 42$ plus 15$ to ship. They arrive and they’re nwb’s. Did nwb end aftermarket offerings?

 

[Eyedaho]

Kinda fwp irritated, had to order new wipers for my 2003. Last time i ordered them i found Nwb local for like 30$ for the set. This time I had to buy Toyotas for 42$ plus 15$ to ship. They arrive and they’re nwb’s. Did nwb end aftermarket offerings?

Bosch Icons FTW!

 

[Bisho]

Mounted up my new to me Darche Eclipse 270 awning. It’s missing a wall section and guy ropes, but it was a bargain. It only takes two minutes to setup without the walls. Walls add a few minutes. Now we can cook in the rain!

 

[th3l0cust]

No more Saggy seatbacks! thanks to @plaidwagon

 

[xswl]

Swapped out my Yakima Fat Cat 6 ski rack to a new Kuat Grip 6 ski rack. Plan is to move the Yakima to my daughter's Crosstrek.

Bought the T-Slot mount kit for it, but basically only using the smaller spacers that came with the kit since the slots it's designed for is bigger than the slots in my rack. Overall, pretty happy with the new rack. Much better build quality, but also heavier. The opening, latching, and lock mechanism is much better than the Yakima and also allows sliding out the skis (although the bindings would hit my rack).

 

[awesomeissquid]

Swapped out my Yakima Fat Cat 6 ski rack to a new Kuat Grip 6 ski rack. Plan is to move the Yakima to my daughter's Crosstrek.

View attachment 3224996View attachment 3224997

Bought the T-Slot mount kit for it, but basically only using the smaller spacers that came with the kit since the slots it's designed for is bigger than the slots in my rack. Overall, pretty happy with the new rack. Much better build quality, but also heavier. The opening, latching, and lock mechanism is much better than the Yakima and also allows sliding out the skis (although the bindings would hit my rack).

That is a slick rack! And those Enforcers are a favorite ski of mine.

 

[Josie'sLandCruiser]

Got my `99 UZJ100 out in the Sonoran Desert again.

Did the Pinkham Canyon trail in Joshua Tree national park yesterday.

 

[aedgington]

Might have made history as the first dumbass to get these on an LX.

 

[ClassyJalopy]

Might have made history as the first dumbass to get these on an LX.

View attachment 3225393

Good choice!
As a fellow dumbass who never got them and has ruined both fenders on his previous LX (on separate occasions), I can tell you that they are totally worth it.

I yearn for a set for Blue but unfortunately they don't work without the companion ARB steps!

 

[OEMGUY0720]

Might have made history as the first dumbass to get these on an LX.

View attachment 3225393

I’d actually do the exact same if I went with the ARB Deluxe front bumper. Looks really good. Are those ARB side step and side rails? Modified legs to the frame to work with the AHC?

 

[crustyLC]

Got my `99 UZJ100 out in the Sonoran Desert again.

Did the Pinkham Canyon trail in Joshua Tree national park yesterday.

View attachment 3225107

Love the hood!
Looks just like mine.

 

[aedgington]

I’d actually do the exact same if I went with the ARB Deluxe front bumper. Looks really good. Are those ARB side step and side rails? Modified legs to the frame to work with the AHC?

Yes they are! The passenger side steps went on with a bit of work but the driver's side needed some pretty significant modification. I get real determined after I've already spent the money and the choices are 'get it on' or 'accept a loss' XD

 

[y5359]

Installed new park brake cable, fixed loose rear view mirror, cleaned ac blower fan, installed new evap foam seal put seats and console back in.

 

[Eyedaho]

Installed new park brake cable, cleaned ac blower fan, installed new evap foam seal put seats and console back in.

View attachment 3225685

View attachment 3225686

How was it getting the HVAC blower out? Did you follow a write up?

 

[y5359]

How was it getting the HVAC blower out? Did you follow a write up?

Yes I followed the write up. It’s pretty easy 3 torx t25 screws and one plug you have to un clip.

 

[offroadkid]

Today we made our LX a little bit less the previous owners and a little more ours!

1. A proper set of Slee Slider Steps.

2. TLCA sticker, (Member 12427)

3. Got rid of the temporary paper license plate and installed personalized license plate, (a gift from my wife in 2002, this will be the 6th Cruiser it has been on)!

My first chance to hand wash it and a fresh set of cabin filters!

 

[socalmtbiker]

Wanted Baja designs s2 on my dissent v1 aluminum bumper. Practice some tig and fabricates some brackets, cut up some plexiglass, and got them in. Have to make a bracket and install my switch pro and get everything wired up.

 

[04gto]

Might have made history as the first dumbass to get these on an LX.

View attachment 3225393

Looks great..... dumbass. Seriously though, I wish I had done this.

 

[04gto]

Installed new park brake cable, fixed loose rear view mirror, cleaned ac blower fan, installed new evap foam seal put seats and console back in.

View attachment 3225685

View attachment 3225686

I need to replace my parking brake cable. Been procrastinating, how hard was it?