xswl

xswl
Reactions
70

Latest activity Postings About Badges Post areas

    • xswl
      xswl reacted to Navjot Chaggar's post in the thread Review: FullyLitLed Interior lights for LX470 with Like Like.
      As I have done with my other vehicles I could not resist to upgrade the interior lights in the 2005 LX470. These LED lights have much better output, better lighting angles, and better light color (pure white) compared to the OEM. Now I have...
    • xswl
      xswl replied to the thread How is the road noise with BFG all terrains?.
      I have KO2s currently and haven't tried other tires yet. However, when I purchased my KO2s, there are different types (based on load-factor). I made sure to buy the ones that are snow rated. It's my understanding the cheaper KO2s that are not...
    • xswl
      I posted about how I ended up mounting my ski rack to this rack here: What have you done to your 100 Series this week? - https://forum.ih8mud.com/threads/what-have-you-done-to-your-100-series-this-week.609679/page-1603#post-14206624
    • xswl
      xswl reacted to dividedan's post in the thread What have you done to your 100 Series this week? with Like Like.
      @xswl Agreed. Same goes for Trasharoo, awning, etc. I store my ski racks in the garage over the summer as well. All of this stuff will last longer the less it sits in the elements, plus then you don’t have to make everything lockable and it cuts...
    • xswl
      I only carry my recovery boards when I’m on a trip that might require them. Every.single.item.that.doesn’t.need.to.come.along.costs.fuel…especially on the roof.…ymmv… nice wheels.
    • xswl
      Had my Prospeed rack for a few months now and finally got around to mounting my ski rack. It was both complicated and simple. I have a Yakima FatCat rack and they sell a mounting kit for t-slot racks, but it isn't the right size for the...
      • ski_distance.jpg
      • ski_close.jpg
      • ski_nut.jpg
    • xswl
      xswl reacted to Mesa Woman's post in the thread What have you done to your 100 Series this week? with Like Like.
      Today I installed my Bowfin Cruisers Roof Rack from @dogfishlake I did most of the work in my living room out of the wind and cold then had my husband, @mesa man, and my son, Dylan, help me load it on before I tightened all the bolts down. I’m...
    • xswl
      xswl reacted to robgv's post in the thread Lighting solutions for trucks with factory bumpers with Like Like.
      I put some baja designs SAE squadron foglights on my 99 land cruiser shown here on my factory bumper: Also, in this video I have a comparison of my HID headlights & foglights compared with an LX570:
    • xswl
      xswl reacted to LandyOverLand's post in the thread The MUD 100 series Photos thread with Like Like.
      Snow day ❄️
    • xswl
      xswl reacted to Superdude's post in the thread What have you done to your 100 Series this week? with Like Like.
      Bought an ASFIR front skid plate. Ordered on Black Friday and received in California today WED. I think it shipped from Israel, so 3 business days, simply amazing. Fits great, I used some longer bolts that I had laying around, instead of the...
    • xswl
      xswl reacted to mdkaboom's post in the thread White Knuckle Off Road MUD Sale with Like Like.
      Sorry, meant this for any 200/tundra owners.
    • xswl
      xswl replied to the thread White Knuckle Off Road MUD Sale.
      But the sliders are advertised as "no drilling required"?
    • xswl
      xswl reacted to davidp14's post in the thread White Knuckle Off Road MUD Sale with Like Like.
      I ordered some this morning 👍 Can't wait!
    • xswl
      xswl reacted to white-knuckleoffroad's post in the thread White Knuckle Off Road MUD Sale with Like Like.
      THANKS!!!
    • xswl
      xswl replied to the thread White Knuckle Off Road MUD Sale.
      Ordered some sliders!
    • xswl
      xswl reacted to skiwpk's post in the thread O6 LX 470 bumper options with Like Like.
      I have a TJM. Love that it’s low profile. I was looking for a non-bull bar option. No mods to body to install.
    • xswl
      xswl reacted to Trunk Monkey's post in the thread O6 LX 470 bumper options with Like Like.
    • xswl
      I ordered a bunch of these (JP-010-D-BLACK) 10 Series BLACK 4 Hole Joining Plate | TNUTZ | TNUTZ - https://www.tnutz.com/product/jp-010-d-black/ and will see if I just drill a hole in the middle will work
    • xswl
      xswl replied to the thread Phoenix Automotive Radio.
      Read this thread LC & LX470 Tesla Style Screen Radio Upgrade with Climate Control: General Discussions - https://forum.ih8mud.com/threads/lc-lx470-tesla-style-screen-radio-upgrade-with-climate-control-general-discussions.1161042/
    • xswl
      Even before I mounted the rack, I tried sliding the Yakima t-slot bolt into the groove and it's just too big to go in even from the side of the crossbar.
    • xswl
      If cost is a factor and/or you prefer black to chrome, the AmeriLite headlight replacements are $210 w/ free shipping on Amazon
    • xswl
      The Yakima T-slot kit comes with this bolt. It's about 38mm long from the cap and 5mm diameter. So it should be mounted facing upwards: Then a plastic piece goes over it that the actual ski rack mounts onto: I think all I would need is a...
      • yakima1.jpg
      • yakima2.jpg
    • xswl
      Installed the Prospeed rack yesterday. Thanks to Brian@Prospeed being so responsive on email when I hit a few snags that wasn't clear from watching YouTube install videos. On my LX470, I completely removed the weather strip to reveal the LC...
      • rack_bolts.jpg
      • rack_cover.jpg
      • rack_new.jpg
    • xswl
      I have the ProSpeed mounted, but can't figure out how to mount my Yakima FatCat 6 ski rack. Bought the SmarT-Slot Kit 2 - https://yakima.com/products/smart-slot-kit-2 thinking it would work, but the bolt heads are too big to fit in the groove...
    • xswl
      Hmmm, I have the same size rims and tires and on occasion been hearing some rubbing noise and thought it was the tires, but now I'm thinking it might be the spare. I'll have to see if I need to adjust it. Would prefer to keep it underneath for now.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom