Using 8020 for the crossbars? We did something very similar for my son’s 4runner. Fun project.
What have you done to your 100 Series this week? (68 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
This popped up this week. Wasn’t there last week. 206k.
Could be (could be) as minor as a leaky cap or hose clamp. Tank color doesn’t l bad.
Yes sir. Ordering that up as soon as I figure out the width
Before I get bashed I know its a 4runner. My buddy has a coupon code for rigid 25%. Just sharing if anyone was thinking of purchasing Rigid
CODE:4RKREW25
Back to the scheduled 100 series
CODE:4RKREW25
Back to the scheduled 100 series
Yeah. I agree. But at 200k, I’ll just replace everything. Bad failure if it does.
Installed my new wheels and tires (285/75/17)
for a sec i thought that was the baldest tire i'd ever seen lol
xlx
SILVER Star
Took the 100 to the shop for an oil leak which i suspect is the oil filter or oil filter housing. i saw the oil leak and was investigating and i could turn the oil filter maybe 1/4" tighter by hand.
Essentially the shop said we have to start with valve cover gasket since its weeping. I already replaced the passenger side, but the shop wouldnt just replace drivers side even though the passenger side isn't leaking and all the oil leak evidence is on the drivers side. I declined the $600 service for both valve covers and just ordered the drivers side with bolts for $30 from the local toyota dealer.
I also went ahead and ordered all the seals for the oil filter housing / oil cooler while i was at it.
Essentially the shop said we have to start with valve cover gasket since its weeping. I already replaced the passenger side, but the shop wouldnt just replace drivers side even though the passenger side isn't leaking and all the oil leak evidence is on the drivers side. I declined the $600 service for both valve covers and just ordered the drivers side with bolts for $30 from the local toyota dealer.
I also went ahead and ordered all the seals for the oil filter housing / oil cooler while i was at it.
awesomeissquid
SILVER Star
That’s not healthy for my wallet…Before I get bashed I know its a 4runner. My buddy has a coupon code for rigid 25%. Just sharing if anyone was thinking of purchasing Rigid
CODE:4RKREW25
Back to the scheduled 100 series
View attachment 2922095
Finally got around to replacing the other tee on the LX. Always a minor pain in the butt.
Keep us posted on that. I have yet to see the oil filter housing leak on these trucks. Without looking at the truck itself, it's hard to tell what it is but if I was a betting man, I'd bet valve cover gaskets leaking. Also, do replaced the spark plug tube rings while you are at it.
Will do, my only suspicion on the oil filter housing is before I bought the truck the steering rack was replaced and I’m 99.99% sure they removed the housing from the block since it had worm gear hose clamps on it on both sides of the filter.
I’m also trying to decide what direction I go with two leaking cv boots, one rebooted by Toyota 1.5 years ago, the other rebooted 100k miles ago. It’s like pulling teeth to get the dealer to tell me the warranty on service is, if it’s 2 year 24k miles I’ll take it back to fix the one they touched.
I removed all of that ugly faux plastic wood trim from around the console, HVAC control radio area, and the doors.
Did you recently install that head unit? Looks like one I was looking at on Amazon. I broke’ded mine last week.
I installed this one in October. Jensen CDR6221 - https://www.crutchfield.com/p_110CDR6221/Jensen-CDR6221.html?tp=20217
