Yes if trimmed two sides of the support bracket. But don't wanna do that
What have you done to your 100 Series this week? (40 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Great job J!
I can really appreciate your front bumper now that there is contrast with the new paint. That bull bar is PERFECT
Longer bolts + spacers should work. I know that's how it has to go if you get Trail Tailor recovery points, so I assume other brands are similar.
Tow Point Spacers 60 80 100 Series - https://www.trail-tailor.com/store/p106/Tow_Point_Spacers.html to give you an idea.
So of the options there it looks like I'd need the combination spacers to fit the recovery points with a 2003 ARB Deluxe on my 2000 LX. Am I reading that correct?
Yes, that's correct. I think the Road Safe recovery point from Australia might be the only ones that don't require a spacer and I'm not even sure about those.
It appear that the spacers could be made easy enough from a piece of 3/8" or 1/2" flat bar.
Edit to add: Here is a thread on the Road Safe recovery points.
Roadsafe Front Recovery Bracket
So I wanted some heavier duty front recovery points. The stock points don't look terrible, but they're too small for a 3/4" shackle. I ordered a set of the Roadsafe brackets from Mark's 4wd in Australia. They looked pretty substantial and have a 5000kg rating. The US dollar is really strong...
forum.ih8mud.com
Last edited:
Installed the Dissent Ultra High Clearance front bumper 
I re-foamed and reinstalled the subwoofer. No pics as I was a bit messy with the glue. It sounds much better though. And then I installed my new fly rod carrier.
We’ll be gone in Southern UT, AZ, but put these on you list, if you mean Carbon County: Gordon Creek Falls, Pinnacle Peak, Bruin Point, and if you have time, 9 Mile Canyon and the Great Hunt Panel. If you’re going to farther south, San Rafael, then see The Wedge, Furniture Wash, Mushroom Rock. PM me for an even cooler place, we don’t share publicly, in that area.
. 
Installed the Dissent Ultra High Clearance front bumper
Looks amazing! What was the lead time like?
I just put in an order for one and it said expect lead time to be 16-18 weeks on the order form. Not sure if that is still accurate but I’m expecting it to be that long so I don’t get too excited about it being here sooner.
Yeah lead time on orders is 16-18 weeks but orders with just front bumpers tend to go out closer to 12 weeks
Raised it to 22" front and 23" rear, still no vibrations
Pretty well done messing with it until my bumpers, rack, and skid plates arrive. Just driving and maintaining it.
Our '07 
developed a leak in the radiator. First glance it looked like the top hose. R&R top hose and after a drive, popped the hood and had more tell tales of antifreeze leaking. Closer inspection, while running up the temps and pressure, found two pin hole cracks in the plastic top... 
I really wanted to throw in a Mishimoto but couldn't bring myself to spend the ~$500. Opted for the KOYO for ~$200. We'll see how it holds up.
Has anyone done an all aluminum radiator by LILAND GLOBAL 2282AA? While researching I stumbled onto them on RockAuto as a Premium option. They want ~$357.00 for their all aluminum replacement. A quick glance at their website looks like they operate in New York State.
Cheers mates,
G
developed a leak in the radiator. First glance it looked like the top hose. R&R top hose and after a drive, popped the hood and had more tell tales of antifreeze leaking. Closer inspection, while running up the temps and pressure, found two pin hole cracks in the plastic top... I really wanted to throw in a Mishimoto but couldn't bring myself to spend the ~$500. Opted for the KOYO for ~$200. We'll see how it holds up.
Has anyone done an all aluminum radiator by LILAND GLOBAL 2282AA? While researching I stumbled onto them on RockAuto as a Premium option. They want ~$357.00 for their all aluminum replacement. A quick glance at their website looks like they operate in New York State.
Cheers mates,
G
Last edited:
Shout out to the 19 year old Michelin spare tire that got us off the trail and to the tire shop for some new shoes. BFG TA KO2’s 285 75 R16. Super quiet and ride great. Had these on my CJ7, YJ, and Isuzu Trooper. I wanted to give the Toyo AT3’s a ride, but none in stock.
Now the pressure is on to install the coils and shocks I’ve had for more than 3 months to give them some extra room.
I did buy the 22 mm flex head ratcheting wrench. No excuses!
Now the pressure is on to install the coils and shocks I’ve had for more than 3 months to give them some extra room.
What pressure were you running on the trail?
Starting my rusted rocker replacement. The driver side is all cut out and the tube “slider” mocked up in the photo. The tube isn’t intended to be a full weight slider, more for light body protection and a simple replacement for beat rockers.
Ive wondered why the DS tube sweeps up like that on the 98-04 application (for what purpose), and the application for 05/06-07 doesn’t. Nothing different between 04 & 06 clearance-wise just vvt balance tubes.
Getting ready for her summer vacation part two.
www.lch4x4.com
New leather front and rear from Land Cruiser Heaven. This is the second set of leather covers I’ve ordered. The first from Lseats. Do not hesitate to pay the difference if you are on the fence. My wife says it’s the difference between a school bus and a lexus. She’s not a car person but I’ve spoiled her with some nice cars.
While the seats were out, I treated her to a full detail.
The leather was installed by.
shamrocktrim.com
I cannot recommend highly enough.
I could have spent all day in their shop. Old school craftsmanship you just don’t see anymore.
Happy Father’s Day boys and girls.
Home - Lch4x4 | Build My Cruiser
www.lch4x4.com
While the seats were out, I treated her to a full detail.
The leather was installed by.
shamrock auto trim
Shamrock Auto Trim is a family owned business located in North Miami Beach, Florida. We offer auto and marine upholstery services including complete interior restoration, convertible tops, and custom motorcycle seats.
I could have spent all day in their shop. Old school craftsmanship you just don’t see anymore.
Happy Father’s Day boys and girls.
Last edited:
Oh! Full on road pressure. I had to watch my two year old and be on a teams meeting. So I figured I’d cruise locally up by Timpanogos. She always passes out off road. Those tires were ready for the great beyond. Should have been paying attention.
