What Did You Do with Your 80 This Weekend? (91 Viewers)

[LFD2037]

I got a few presents today....
View attachment 1025920
However here is question I installed the switch and push the bottom in 4hi and abs and center diff lock came on. Do I still need to do the 7pin mod?

Need a review on that LED strip! 4HI? I seriously don't recall ever seeing mine say 4HI. Maybe it does and I never paid attention but I don't think so. Also, I didn't see a need for the 7pin mod but others like it so its up to you.

 

[AMMO]

Had a snow day from school/work so I loaded up my son and friends and went to some hills not far from our house (but off limits to the public) so they could snowboard. Plowed through some 3-4' drifts to get there. Not bad for a stock 80.

Dude you just took me back to my hey days... Good stuff. Nothing better then some small back yard / secret spot sessions.

-A

 

[AllMountainToy]

Mounted my inverter that I took out of my 2011 Tacoma. Used the factory sub mounting bracket and rear ash tray as mounting locations. Speaker cover makes for a good circulation vent.

 

[scrowley]

j

What bumper/carrier is that in the rear? That whole setup looks awesome!

It is 4x4 labs that I modified. I wrapped wings and built bolt on wings with connector bar. Went along with my tube project to replace flares. It Works amazing in the trees.

 

[Atticus]

Good thing we're not an anti-vaxing douche bag family.

Just having the MMR may not be enough to protect your family, because of herd immunity deficiencies caused by these idiots who don't vaccinate their kids.

http://www.wired.com/2015/01/vaccinated-people-get-measles-disneyland-blame-unvaccinated/

 

[Qball]

herd immunity deficiencies caused by these idiots who don't vaccinate their kids.

http://www.wired.com/2015/01/vaccinated-people-get-measles-disneyland-blame-unvaccinated/

Maybe it's a self elected way to thin the herd??? People in less fortunate places begs to get any vaccination for their kids.

I don't like crowded areas anyways, part of the reason I have a cruiser.

 

[SammyT96LX450]

Need a review on that LED strip! 4HI? I seriously don't recall ever seeing mine say 4HI. Maybe it does and I never paid attention but I don't think so. Also, I didn't see a need for the 7pin mod but others like it so its up to you.

Yep I'll get a review up in the next 2-3 weeks. I ordered 50 inch light bar mounts from Australia to mount my light bar since I don't have a roof rack. So once they show up I'll get the review done....

 

[NLXTACY]

Just having the MMR may not be enough to protect your family, because of herd immunity deficiencies caused by these idiots who don't vaccinate their kids.

http://www.wired.com/2015/01/vaccinated-people-get-measles-disneyland-blame-unvaccinated/

You know, this is one of those things that in the back of your head you kind of know/take for granted, but when you see it spelled out like that it just gets depressing. I blame Jenny McCarthy.

 

[scrowley]

Pic of my meeting with the tree yesterday... And another for fun.

 

[RS6tofj80]

I started my S-Pod install..... I ordered the 6 panel kit with a blend of switches and no panel mount. the rear of the panel is tight against the brace but it all is wired up and jus

t waiting for me to get the control panel mounted under the hood..... I need to get a alum brace to mount it welded on Wed.

I also mounted my 1500 watt Inverter under the new passneger seat and ran 4 ga wires up to the battery with a bussman 125 amp fuse

Power for the rear panel and a dedicated 10/2 line was run for the Viair compressor on the Phil Mount, along with 12/3 for the roof LED bar and side LED, and then 12/2 for the rear LED's on the YOtaTeq mounts.... getting it all under the carpet, shielded and everything was time consuming but it also gave me time to run the wire for the Gamviti 12v dual batt monitoring panel .... It's been sitting for 9 months now.... still need to solder the connections tomorrow.

and most importantly I mounted up my Zombie outbreak medallions...... they are truly amazingly well made and must weight a half pound.... really nicely done and a perfect match color-wise...

 

[skywalk26]

Installed the new flare gasket that's been sitting in the garage for about a year. What a tedious task but it is done! Taking the flares off looked more difficult than it really is.

 

[allan man]

Installed the new flare gasket that's been sitting in the garage for about a year. What a tedious task but it is done! Taking the flares off looked more difficult than it really is.

Pictures?

 

[skywalk26]

Pictures?

I didn't take any during the install but here are some after I was done.

 

[Golgo13]

j


It is 4x4 labs that I modified. I wrapped wings and built bolt on wings with connector bar. Went along with my tube project to replace flares. It Works amazing in the trees.

j


It is 4x4 labs that I modified. I wrapped wings and built bolt on wings with connector bar. Went along with my tube project to replace flares. It Works amazing in the trees.

Would you mind posting some pictures or a thread of your modification? I really like the way this looks. Like a beast

 

[CowboyUp]

Rollover with my Cruiser and still alive and walking

 

[Dubbinchris]

Rollover with my Cruiser and still alive and walking

UGH, that's no good! Glad you're okay. Details?

 

[Atticus]

Maybe it's a self elected way to thin the herd??? People in less fortunate places begs to get any vaccination for their kids.

I don't like crowded areas anyways, part of the reason I have a cruiser.

I know you're joking, but children don't have the opportunity to choose to protect themselves and everybody is at risk. Unless you home school your children and live on a farm, they are at risk too.

 

[CreeperSleeper]

Snow day so besides moving snow I swapped out a bent front radius arm. Used one I bought was missing a bushing so I pressed one out of old arm and into the new. must have hit that arm damn hard on a rock. Bent is on right....kind of obvious I guess..
View attachment 1025897 View attachment 1025898

@CreeperSleeper twisted his pretty good, almost a S shape.

Yeah, mine was a lot worse than that! I thought I had a picture of it, but I guess not... My poor 80 had a hard life.

 

[BILT4ME]

Pic of my meeting with the tree yesterday... And another for fun.
View attachment 1025961 View attachment 1025962

You're right! It DOES work amazing in the trees. It ATTRACTS them to the door and fender apparently!

 

[jabandsnort]

Installed my winch!