What are you working on? (5 Viewers)

[Pacer]

Rockers were rotten!

 

[jamarquardt22]

^^^ We need more Keystone Cruiser Cards.

X2
I was thinking the same excat thing. I'm all out myself.

 

[jamarquardt22]

Rockers were rotten!View attachment 1389213

It's starting to look like a buggy!

 

[RWBeringer4x4]

Previous owner had really solid weld penetration on the engine mounts...

I have no idea how I've been driving this thing for 5 years without the engine falling out...I seriously popped one of the scab plates out with a crow bar...

 

[Pacer]

It's starting to look like a buggy!

I hope not, this is the 62, not the Trekker.

 

[shmukster]

Ride and handling was just fine.
Just wanted oem.

Gotcha!

 

[brian]

Previous owner had really solid weld penetration on the engine mounts...

Just because you have a welder doesn't make a person a welder

 

[brian]

guess whats next?

 

[shmukster]

Full width drop down tailgate of course!!!!!!!!!!!!!!!!!!!!!!!!!

 

[jamarquardt22]

guess whats next?

View attachment 1391194

A gate to hold back King Kong?

 

[brian]

Front suspension finished.
Got side tracked for a minute and started on a new bumper.

 

[shmukster]

Brian- looking good! Can't wait to see it on the road.

 

[brian]

looks like there is going to be a real steel tailgate fill in piece for sale soon....decided to just get their tailgate with the mounting provisions already in place rather than try and make this one work.

 

[brian]

Changed my mind on the mini hoop.
Can't get past the tight and clean look.

 

[shmukster]

Good call Brian!

 

[YotaFun]

Been working on a few things.
One was getting the alternator to actually charge the truck again, apparently it was staying in place with a hope and a prayer and some corrosion and rust because this was the condition of the adjuster bolt:


Second is what I am referring to as 'Project Fluffy':

 

[YotaFun]

Also I was getting extremely tired of fogged up headlights on our cars:

 

[YotaFun]

I did this on my Camry as well and here is the procedure I used because the off the shelf stuff was just not cutting it and internet fixes weren't either:



This is the setup:


Step One:


At work we have Dewalt buffers so the speed numbers are a little different then the Harbor Freight special. At work Stage one is done at 1200-1400 rpm, on the digital read out on the Harbor Freight buffer I went to 20

Step Two:


Speed on the Dewalt would be 1000 rpm, on the Harbor Freight 15.

Step Three:


Again, Dewalt 600 rpm, Harbor Freight read out 10.

Figured I would share if you may have a vehicle that needs a polishing.
You can finish up the process with a headlamp sealant or wax of your choice.

 

[dci blair]

Installed a factor 55 prolink the other day. While I was at it I went to install a new winch control box as we had a brand new one at the shop that had a damaged cover. Since the new cover was damaged I needed to reuse my old one. During that process 3 of the new solenoid studs broke and 3 of the old ones broke. So one trip to quadratec later I'm several bucks lighter to "fix" something that worked perfectly fine. Moral of the story: if it ain't broke...

 

[jamarquardt22]

I think the only real long term fix is new headlight housings. It seems like after you polish them your committed to doing it 2-3 times a year.