TWT -- The Wrenching Thread (7 Viewers)
- Thread starter jfz80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
That gets rid of the piston slap noise, right??? At least on the inside!
The models I used were:
TS-G1645R (6 inch for front)
TS-G1045R (4 inch for rear)
Both from Amazon and both very reasonably priced
I replaced mine with i believe the same speakers a few years ago and have been happy with them.
Wanted to be sure you saw this: For Sale: - Direct fit stereo and speakers for FJ80
jfz80
Cruisin’
- Thread starter
- #1,406
@RLMS Redline tube door and cage install with @steel2415 Great 40 Todd. That rig is amazing. Awesome work so far.....keep it up.
Prep and Powdercoating by kelly's kustoms in eden nc.
Prep and Powdercoating by kelly's kustoms in eden nc.
forrest5000
SILVER Star
Did Todd sell the stout?
Thanks for your help Jason. Look forward to picking your brain and popping a top again.
Picked up the new axles for the Suburban yesterday. A 14BFF and Dana 44HD. If I ever break the 44 it will be time for a 60.
350 mile round trip through the mountains. I reserved a dodge ram from enterprise a week ago and when I arrived yesterday morning they tried to give me a crew cab frontier that had what looked to be a 4 foot bed on it. Strangely no enterprise in 50 miles had a full size truck for them to send me so they gave me a dodge caravan
I made them give me full service coverage just in case the 750 lbs of axles and driveshafts broke the stow and go seat coverings. It actually held up great. Loaded with a a fork lift and then slid them out with Andrea and myself when I got home.
350 mile round trip through the mountains. I reserved a dodge ram from enterprise a week ago and when I arrived yesterday morning they tried to give me a crew cab frontier that had what looked to be a 4 foot bed on it. Strangely no enterprise in 50 miles had a full size truck for them to send me so they gave me a dodge caravan
I made them give me full service coverage just in case the 750 lbs of axles and driveshafts broke the stow and go seat coverings. It actually held up great. Loaded with a a fork lift and then slid them out with Andrea and myself when I got home.
New starter contacts
New alternator brushes
New belts
New heater hoses
New thermostat
New ac tension pulley
New ideler pulley
Engine and radiator flush
Swapped 851's out for 850's
F/R diff fluid change
Extended breather line
The hardest part was trying to get the OE clamps back on the larger heater hoses. Distributor o ring is the only thing I didn't get to
Sheesh dude. You got some extra free time to come work on my junk too? lol
I never want to work on anything ever again.
Then you should just give me your cruiser, and buy a new car with a warranty, and have your significant other remove your test tickles from her purse and feed them to a trashpanda (racoon).....you are undeserving....
Then you should just give me your cruiser, and buy a new car with a warranty, and have your significant other remove your test tickles from her purse and feed them to a trashpanda (racoon).....you are undeserving....
Well that escalated quickly
I hardly ever have to work on my Barbie car...just sayin'....
Picked up the new axles for the Suburban yesterday. A 14BFF and Dana 44HD. If I ever break the 44 it will be time for a 60.
350 mile round trip through the mountains. I reserved a dodge ram from enterprise a week ago and when I arrived yesterday morning they tried to give me a crew cab frontier that had what looked to be a 4 foot bed on it. Strangely no enterprise in 50 miles had a full size truck for them to send me so they gave me a dodge caravan
I made them give me full service coverage just in case the 750 lbs of axles and driveshafts broke the stow and go seat coverings. It actually held up great. Loaded with a a fork lift and then slid them out with Andrea and myself when I got home.
That 14b is a heavy SOB, isn't it? Nice score.
