Builds Trail Tailor- Custom Armor Build plus a few things

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

1st of three 200s coming in for holiday makeovers.

J

2008 200.webp
 
A 2008, 2014 and 2019 quick R&D and design changes from the old versions and new will combine.

Great thing about having a few years of products out there is I can see where old was better in places and new will make improvements.

Excited to work with the 200 again. We have several customers on the wait lists for bumpers, racks and sliders. Thanks for being patient.

J
 
All,

First, I appreciate all the inquiries on bumpers.

The early 200 front will be the first order of business and then the rear for all 200s, then the 2016-2020 front bumper.

I should have a preview of the early front in about 7-10 days. Similar to the old version with a few changes.

Jason
 
Markuson said:
Man, you are gonna live at the shop now with all the new creative toys...!
Click to expand...

First order is to get them baselined by a Haas tech next week and a complete maintenance. These were in a community college program and always serviced by Haas. They are LOW hours.

Second order is to work with my military contractor for """"""" hammers.... :D

J
 
Didn't know you were forging gold and platinum these days... ;)
 
New design for the '08-'15 200 series in the works. Center section is set. Adjustable 3/8" frame plate, brace and frame skid brackets and will house a 12k winch. Recessed custom Trail Tailor aluminum fairlead, LED bar and wing/ combo driving lights.

This one will be similar to the @TonyP high cut/profile; full front replacement for the rock crawlers. This frame mounting is stronger than the previous version. Never had an issue from the prior... just making a stronger and better mousetrap.

But will also have a lower cut plastic cover version for the weekend warrior camper customers as well............ (I hate to use the term "mallcrawler"). These of course would handle anything you could throw at them......... just an aesthetic "thang"..........

J


IMG_20191207_105150735.webp
IMG_20191207_105242907.webp
IMG_20191207_105324127.webp
IMG_20191207_105411416.webp
 
TRAIL TAILOR said:
New design for the '08-'15 200 series in the works. Center section is set. Adjustable 3/8" frame plate, brace and frame skid brackets and will house a 12k winch. Recessed custom Trail Tailor aluminum fairlead, LED bar and wing/ combo driving lights.

This one will be similar to the @TonyP high cut/profile; full front replacement for the rock crawlers. This frame mounting is stronger than the previous version. Never had an issue from the prior... just making a stronger and better mousetrap.

But will also have a lower cut plastic cover version for the weekend warrior camper customers as well............ (I hate to use the term "mallcrawler"). These of course would handle anything you could throw at them......... just an aesthetic "thang"..........

J


View attachment 2151425
Click to expand...

Is that the winch fairlead?
If so, I’ve never seen one flush like that.
VERY interesting if that’s the actual fairlead...freed from sitting within a sharp-edged shroud or recessed frame.
 
Markuson said:
Is that the winch fairlead?
If so, I’ve never seen one flush like that.
VERY interesting if that’s the actual fairlead...freed from sitting within a sharp-edged shroud or recessed frame.
Click to expand...

Yes full recessed! I started this a couple years back and it started with my 60 bumpers.

IMG_20180922_092032978.webp
 
You must log in or register to reply here.

Similar threads

OldCarSmell
Trail Tailor Hidden Winch Mount and Ironman 12k winch install question?
Replies
5
Views
1K
mokrunka
M
UT08LX570
Custom amber headlight DRLs
Replies
0
Views
369
UT08LX570
UT08LX570
N
Armored 200
Replies
6
Views
677
Mingus Dew
Mingus Dew
thecapedcapper
Build Dates!
Replies
19
Views
2K
bigdaddycaddy
B

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom