Gday fellas
my 1996 1HD-FT 80 is making a click/clunk when turning. It makes it once when turning left, then once when turning right and so on. It’s when the weight shifts. It sounds like a metal click.
im at wits end and I’ve nearly replaced everything!
Knuckles rebuilt, wheel bearings, kingpin bearings (the works). CVs seem fine and were repacked with grease.
Springs are 2” OEM and I’ve tried reseating them in different locations. Not that.
Shocks are Ironman and quite new. Bushes fine.
new panhard bushes.
control arms bushes seem good.
Sway bars removed for a test.
I’ve recently had a crack in the panhard tower that was properly ground and welded. I’ve also looked extensively for cracks in the chassis but can’t find any.
all this and I still have the noise. I’m worried it’s a crack in the chassis that I can’t find.
Sound like it’s coming from the front passenger (in a RHD) side somewhere.
anyone got any tips?
thanks.
my 1996 1HD-FT 80 is making a click/clunk when turning. It makes it once when turning left, then once when turning right and so on. It’s when the weight shifts. It sounds like a metal click.
im at wits end and I’ve nearly replaced everything!
Knuckles rebuilt, wheel bearings, kingpin bearings (the works). CVs seem fine and were repacked with grease.
Springs are 2” OEM and I’ve tried reseating them in different locations. Not that.
Shocks are Ironman and quite new. Bushes fine.
new panhard bushes.
control arms bushes seem good.
Sway bars removed for a test.
I’ve recently had a crack in the panhard tower that was properly ground and welded. I’ve also looked extensively for cracks in the chassis but can’t find any.
all this and I still have the noise. I’m worried it’s a crack in the chassis that I can’t find.
Sound like it’s coming from the front passenger (in a RHD) side somewhere.
anyone got any tips?
thanks.