Rifleman
Reactions
2,807

Latest activity Postings Post Areas About Post areas Events

    • Rifleman
      Rifleman replied to the thread Hidden winch mount plate?.
      The front hidden fairlead cover came with the winch when i bought it, sorry to say Ramsey no longer offers it for sale, As for the controls, i didn't like the plastic solenoid box that came with the winch, it was just to big so i made a more...
    • Rifleman
      Rifleman replied to the thread Hidden winch mount plate?.
      For those wondering what a finished hidden roller fairlead setup would look like if they didn't use a Hawse fairlead
      • 1708060690262.jpeg
      • 1708060773824.jpeg
      • 1708060822754.jpeg
    • Rifleman
      MrMacdugal, Looking at the photo of the aftermath of you changing those rear brake pads makes me realize how much i HATE RUST! That object laying on the ground that looks like a dirt clod, in another life use to be a brake caliper, I don't even...
    • Rifleman
      Rifleman replied to the thread Jerry cans for fuel question..
      Another idea is to go to you're local Army surplus store and buy some used Nato fuel cans, They are the same can as the Wavian metal fuel can, but WAY LESS money, My local surplus shop sells them for 35 bucks a piece, Below are 2 photos of the...
      • 1707675747040.jpeg
      • 1707675876873.jpeg
    • Rifleman
      Just a suggestion,"RTV/Silicone" doesn't play well with fuel, or fuel vapors, it will turn into a gooey jelly when exposed to fuel so i wouldn't use that to secure your cap In fact, I'd use a large hose clamp to secure the cap, that way you'll...
    • Rifleman
      azrider Since you're in Phoenix you should try BRIDGESTONE HOSEPOWER 3327 N 29th Ave Phoenix, AZ 85017 Phone: (602) 253-3123 Fax: (602) 258-2034 they make Hyd hoses, Just remember one thing when you're looking for this hose, make...
    • Rifleman
      Rifleman replied to the thread Welding Front Drive Flanges.
      Welding cast iron to steel is never a good idea, Below is a quote from a welding site listing the problem of welding a cast iron flange to a steel axle shaft, Quote "The main problem with welding cast iron comes from its high carbon content...
    • Rifleman
      This subject came up just the other day in another post, and in that post it was said that the FSM lists the torque for that nut at 181 foot pounds Below is a link to that post...
    • Rifleman
      EricG, Just as an FYI anytime you play in water, and the depth of that water goes over the hubs for any length of time you should plan on doing a oil change on your diffs, The reason i say that, oil seals are made to keep oil in, not to keep...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom