Tank5
SILVER Star
- Thread starter
- #741
I was anticipating having to make adjustments to the steering but wanted to take it for a test drive before I exposed the Hellfire arm to my hackery.
The combination of high steer and the pan hard mount are really tight the way I built it and limited my steering. I expected I would need more range and the drive confirm that.
I cut a scallop out of the Hellfire arm and shaved a little of the edge of the bracket. I gained a good bit of steering doing this and the bump stops are set to give me about 3/16 of an inch clearance.
I will add some paint and put it back together before another test drive.
The combination of high steer and the pan hard mount are really tight the way I built it and limited my steering. I expected I would need more range and the drive confirm that.
I cut a scallop out of the Hellfire arm and shaved a little of the edge of the bracket. I gained a good bit of steering doing this and the bump stops are set to give me about 3/16 of an inch clearance.
I will add some paint and put it back together before another test drive.
Last edited: