SWITCH RELABLES- printable single sheet (1 Viewer)

[ironhippy]

Tried the relabel and it worked just wasnt as "factory" as I wanted. Picked up some avery clear shipping labels (more opaque than clear). Turned out much closer to factory, also layered some green printed labels on the back so the light filters and matches the other factory switches. Factory on the right relabeled on the left.

Very slick! Nicely done.

 

[4xFletch]

Has this ship sailed or can I request a label? Looking for the fan symbol in the middle and "lo" and "hi" on either side for a 3 position switch.

Thanks

 

[NLXTACY]

Has this ship sailed or can I request a label? Looking for the fan symbol in the middle and "lo" and "hi" on either side for a 3 position switch.

Thanks

Yes, I am still taking requests

I'll be home in a bit and will crank it out.

 

[MANUCHAO]

Ok.. I need want some too...
Air compressor, Rear Locker, Back up lights, Light Bar and Aux fan.
I did not read the thread so what do I need to do to get some of these ?

 

[NLXTACY]

Ok.. I need want some too...
Air compressor, Rear Locker, Back up lights, Light Bar and Aux fan.
I did not read the thread so what do I need to do to get some of these ?

It's all on the first post Frank

Basically look over the PDF to make sure the one you want is there. If so then print it out on label paper.

 

[UnderDawg]

Yes, I am still taking requests

I'll be home in a bit and will crank it out.

He said "crank it out"

 

[4xFletch]

Yes, I am still taking requests

I'll be home in a bit and will crank it out.

That would be super! Thanks.

 

[tomcat]

Can i please have one for an air compressor

 

[NLXTACY]

Just realized there are a couple missing that have been requested. I'll see if I can do these up.

 

[tomcat]

Please can you make one for an air compressor. i tried to make one but it sucks balls. My compressor is in & wired just need a nice switch

 

[NLXTACY]

Ah shoot. I forgot about this. I'll do up the missing icons first thing in the morning.

 

[tomcat]

air compressor please ????? PLEASE

 

[LS1FJ40]

Hey Joey, Any chance you could make an under hood lights switch? Maybe it says:
Engine
Light
or
Bay
Light
or
Hood
Light

Thanks!

 

[Mr Cimarron]

Grid heater would be nice but I don't know what the symbol would be. I think I've used four or five of your labels now. I had a couple sheets printed out on clear paper at Kinkos. Their black turned out much darker than I could do on my home printer. Keep up the good work.

 

[NLXTACY]

OK ok I went thru and made a few more. On a couple of them I didn't have a clear idea on the icon so I instead made a couple of options that you can pick from. I will update the very first post in just a minute or so. I need to measure out the switch for Sub tank and Fan speed before I can make those icons.

Added:
• Wench (instead of winch )
• Horn
• Ram's horn
• Hood Light (text)
• Engine Light (text)
• Hood Light (icon)
• Air Compressor in 4 flavors
• Grid Heater (although it looks like a maxi-pad )

 

[NLXTACY]

Alright guys, finally did these. Please look at post #1 for the new file.

How about a horn symbol like the one on the airbag?

I suggest one that says "WENCH" to go along with "WINCH"...

Can i please have one for an air compressor

Hey Joey, Any chance you could make an under hood lights switch? Maybe it says:
Engine
Light
or
Bay
Light
or
Hood
Light

Thanks!

Grid heater would be nice but I don't know what the symbol would be. I think I've used four or five of your labels now. I had a couple sheets printed out on clear paper at Kinkos. Their black turned out much darker than I could do on my home printer. Keep up the good work.

 

[LS1FJ40]

OK ok I went thru and made a few more. On a couple of them I didn't have a clear idea on the icon so I instead made a couple of options that you can pick from. I will update the very first post in just a minute or so. I need to measure out the switch for Sub tank and Fan speed before I can make those icons.

Added:
• Wench (instead of winch )
• Horn
• Ram's horn
• Hood Light (text)
• Engine Light (text)
• Hood Light (icon)
• Air Compressor in 4 flavors
• Grid Heater (although it looks like a maxi-pad )

View attachment 1019159

Joey, Anyone ever tell you that you have mad skilz?!! Thanks! I really like the hood light icon. I'm going to use that one!

 

[NLXTACY]

Ok so yes I can do these as well BUT I need to grab mine and take all of the measurements first. I will try and get to this today but no promises.

I have a request for an addition if you have time - a Fuel Gauge Switch (Sub v. Main) for a vertical-mount heater switch. I just want to be like CDan...

https://forum.ih8mud.com/80-series-tech/36386-i-have-gas-but-how-much.html#post393053

Has this ship sailed or can I request a label? Looking for the fan symbol in the middle and "lo" and "hi" on either side for a 3 position switch.

Thanks

 

[NLXTACY]

Joey, Anyone ever tell you that you have mad skilz?!! Thanks! I really like the hood light icon. I'm going to use that one!

Thanks

Don't know if you can tell but I took a picture of the profile of my truck and just used that to base the icon off of. Its barely noticeable but it makes me happy

 

[retrofive]

I need a "Hooker In" and "Hooker Out" for my modified antenna "Wench" control switch.