A) 167.8 - B) 165 = total adjusting shim thickness of 2.8 mm.
Isn’t this too much? When I subtract the lower bearing shim thickness the upper thickness will be something like 2.4 mm. That’s almost every shim in the rebuild kit. Races are seated. Preload is 5 lbs. What am I missing?
When I took it apart 2 .5 mm shims in top and a .2 mm shim on the bottom. Took it apart and redid it…got the same measurement.
Isn’t this too much? When I subtract the lower bearing shim thickness the upper thickness will be something like 2.4 mm. That’s almost every shim in the rebuild kit. Races are seated. Preload is 5 lbs. What am I missing?
When I took it apart 2 .5 mm shims in top and a .2 mm shim on the bottom. Took it apart and redid it…got the same measurement.