SQOD Squad - Stupid Question Of the Day (28 Viewers)
- Thread starter JamesC
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Nah looks good to me! Send it
Extend the rear bump stops 3-4" and if it's narrow enough maybe it'll work
With a low offset the front will self-clear... once the tires rip off the front fenders you're golden
Possible smoking gun and follow up SQOD.
After picking my rig up from Torfab for cam tower reseal, the alternator almost left me stranded on the side of the highway. Back at torfab they found a cooked alternator. At the time I assumed oil from leaking cam tower cooked it.
Fast forward to today I was rooting around and saw another wet spot on front passenger side near steering rack. I confirmed it’s not cam tower or timing cover and the rack itself is dry. But when I look up from rack I see a very wet PS line and a pretty wet fitting on the pump itself-which is above the alternator.
My SQOD: on a scale of 1 to pay somebody, how bad is it to replace the PS pump? And anyone have any threads handy?
After picking my rig up from Torfab for cam tower reseal, the alternator almost left me stranded on the side of the highway. Back at torfab they found a cooked alternator. At the time I assumed oil from leaking cam tower cooked it.
Fast forward to today I was rooting around and saw another wet spot on front passenger side near steering rack. I confirmed it’s not cam tower or timing cover and the rack itself is dry. But when I look up from rack I see a very wet PS line and a pretty wet fitting on the pump itself-which is above the alternator.
My SQOD: on a scale of 1 to pay somebody, how bad is it to replace the PS pump? And anyone have any threads handy?
Do any non rust people (west coasters like me) ever wash the inside of the frame? I was doing a post mud rinse and used the pointy tip of the pressure washer to hit a few holes in the frame. Let it run until clear and holy moly I will be doing that regularly from now on.
