SQOD Squad - Stupid Question Of the Day

[Sac Cerevisiae]

Did the 2016+ LCs come with the roof rack cross bars? OEM Part # 6340960070 "SUPPORT SUB-ASSY, ROOF RACK, CENTER"
ROOF PANEL & BACK PANEL | LAND CRUISER 07.2016 218 | Toyota | Genuine Parts Catalogs | PartSouq Auto Parts Around the World

I only have the rails, no cross members.

 

[ty240]

Did the 2016+ LCs come with the roof rack cross bars? OEM Part # 6340960070 "SUPPORT SUB-ASSY, ROOF RACK, CENTER"
ROOF PANEL & BACK PANEL | LAND CRUISER 07.2016 218 | Toyota | Genuine Parts Catalogs | PartSouq Auto Parts Around the World

I only have the rails, no cross members.

Mine came with two cross members. Trying to source another if you know a place to get them cheaper than the dealership.

 

[mcgaskins]

Did the 2016+ LCs come with the roof rack cross bars? OEM Part # 6340960070 "SUPPORT SUB-ASSY, ROOF RACK, CENTER"
ROOF PANEL & BACK PANEL | LAND CRUISER 07.2016 218 | Toyota | Genuine Parts Catalogs | PartSouq Auto Parts Around the World

I only have the rails, no cross members.

My 16 came with 2 black cross bars.

 

[Sac Cerevisiae]

PO must have taken them off... They also "lost" the DVD remote and the Tool Bag/Box.

 

[Markuson]

PO must have taken them off... They also "lost" the DVD remote and the Tool Bag/Box.

I have an extra set of tools from a 109 series that should work with your 200.

I also have my own 200’s box that fits in the tailgate if you are interested.

 

[Sac Cerevisiae]

I have an extra set of tools from a 109 series that should work with your 200.

I also have my own 200’s box that fits in the tailgate if you are interested.

PM’d

 

[gentimmy]

Has anyone (forum specific) gone with a Dobinsons front bumper on their LX?

 

[Ali FJ80]

Has anyone (forum specific) gone with a Dobinsons front bumper on their LX?

I have.

 

[gentimmy]

I have.

What are your thoughts? The cost difference to the ARB is appealing but I've heard of issues with crash panels/airbags I believe...I could be making that up.

 

[Ali FJ80]

Had not heard that before but I did my research a while ago before I got one in Jan of 17. I have had no issues at all and the build quality is good and has the crumple zones in the mounts etc. The difference between this and the ARB Sahara was only a few hundred but I like the full hoop up front vs just the middle section of the ARB. It comes in stainless but I blacked it out along with the grill to tone down the front end a bit.

Here is what it looked like still in stainless.

 

[JohnJB]

What are your thoughts? The cost difference to the ARB is appealing but I've heard of issues with crash panels/airbags I believe...I could be making that up.

FWIW, Dobinsons markets the bumper as "airbag compatible."

 

[grinchy]

I have.

Do you have a front on shot? Looks great!

 

[NCMTNS]

Did the 2016+ LCs come with the roof rack cross bars? OEM Part # 6340960070 "SUPPORT SUB-ASSY, ROOF RACK, CENTER"
ROOF PANEL & BACK PANEL | LAND CRUISER 07.2016 218 | Toyota | Genuine Parts Catalogs | PartSouq Auto Parts Around the World

I only have the rails, no cross members.

Mine came with the cross bars.

 

[Ali FJ80]

Do you have a front on shot? Looks great!

Found one

 

[gentimmy]

Just wish there was an LED insert for those light housings

 

[Markuson]

Just wish there was an LED insert for those light housings

What light housings?

Headlights? LEDs are available.
Interior lights? LEDs are available.

 

[KLF]

I assume he means the fog lights.

 

[Markuson]

I assume he means the fog lights.

Oh. So he’s referring to the Dobinson bumper.

I wish people would include at least PARTIAL quotes when asking Qs in a thread that is 88 pages deep...

 

[Sandroad]

I need to remove the factory rack crossbars in order to install a Yakima canoe loader. I've read that I just need to remove the rear trim on the side rails and the bars will slide out to the rear. But, I can't figure out to remove that plastic trim on the roof rails without breaking it. I see the 2 little slots on the inside bottom edge that look like a place to pry, but nothing will give way. I remember on my 100, the trim cover would slide backward a bit and pop off, but that didn't work on the 200. Any insights from those who have recently done this seemingly simple job?

Edit: Never mind; got it. I was just being too wimpy in getting that trim off.

 

[gentimmy]

Oh. So he’s referring to the Dobinson bumper.

I wish people would include at least PARTIAL quotes when asking Qs in a thread that is 88 pages deep...

My apologies. The last few messages were surrounding the Dobinson bumper without interruption so I just kinda ran with it.