Show me your fj cruiser steelies on 37’s. (1 Viewer)
- Thread starter mjeckell
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
jfz80
Cruisin’
This is not the FJ Cruiser forum.
But the OEM FJ Cruiser steel wheels are used on 80's some, maybe that is what OP is talking about
OK, I can see that.
davidp14
SILVER Star
Definitely watching this one. 
- Thread starter
- #7
Spacers? Wheel well modifications? Bump stops?
BlueCruiser84
SILVER Star
Fj cruiser wheels “fit” with no spacers. They will sit further under the fender wells than OEM wheels and rub the body inside the rear fender opening when really stuffed. Most folks run spacers because of this.
jfz80
Cruisin’
no, no, and no.
As mentioned they are 5.5 bs vs stock 4.5.
The previous sets I ran 2007-10 (iroks and coopers) fit much better and lightly rubbed the rear frame rail and fender liner but I attribute that to the 4” Slee coils being newer and taller at the time.
back on 315s for now but plan a 1” spacer and bump drop in the rear if I keep the 37s.
37” STT pro on FJC Steelies with 1.5” wheel spacers here.
Crush 4
SILVER Star
Awesome looking rig
Where does everyone get the steelies?
- Thread starter
- #12
I just bought some aftermarket ones from RoadReady. OEM specs. I already have the 1.5” spacers behind the stock alloys. Waiting until my 315’s wear out, then I’ll move to the 17” wheel and go 37’s. Just more options with the 17” rather than one option (trepadors).
jfz80
Cruisin’
Ive grabbed 3 sets off craigs list for 2-250 each. They are 50-125 ea through car-part usually
17s, TMI weld-ons, no spacers yet, 37x12.50 Kanati Hawgs.
Sonofaskipper
SILVER Star
God I need to de-flare!
37 x 12.5 on 16s - steel beadlock rings. =)
Craigslist
Crush 4
SILVER Star
What icy did you use?
Crush 4
SILVER Star
Sorry what lift?
Bludozer
SILVER Star
I don't see how this set up wouldn't rub. Have you flexed it out?37 x 12.5 on 16s - steel beadlock rings. =)
